OWC 1S6T32R808GB 8GB DDR3L 1600 CL11 2Rx8 204-pin 1.35V Non-ECC SODIMM memory upgrade
- 8GB
- 204-Pin DDR3L Non-E…
OWC
An 8 GB DDR3L SODIMM running at 1600 MHz with CL11 latency for HP Envy 15 laptops
This OWC module adds 8GB of DDR3L 1600 memory to compatible HP Envy 15 series notebooks. It uses a 204-pin SODIMM form factor and runs at 1.35V with CL11 latency. The single stick is unbuffered, non-ECC and organised as 2Rx8.
Owners of those specific laptops can install this JEDEC-standard module as a straightforward DIY upgrade. Systems requiring DDR3L at a different speed or a different pin count will not accept this part.
The laptop must take low-voltage DDR3L SO-DIMMs running at 1600 MT/s with a 204-pin edge connector. If the service manual specifies a different voltage, speed or pin layout, this module will not work.
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R808GB |
| Capacity | 8GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP ENVY 15 Series using DDR3 1600 Memory |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Yes, the module uses the standard 204-pin DDR3L SODIMM form factor required by HP Envy 15 models that support DDR3 1600 memory.
Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into place; the step often missed is pushing down hard enough to engage both clips.
No, memory operates at the JEDEC-standard 1.35 V with CL11 timing and requires no firmware, drivers or future maintenance once correctly installed.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?