partaker A22 21.5" IP65 resistive i7-10510U 16GB DDR4 256GB SATA all-in-one PC
- All-in-One
- Windows 11 Pro
partaker
A 21.5 inch IP65 front-panel all-in-one with resistive touch, fanless Celeron J6413, 32GB DDR4, 512GB SATA SSD, triple LAN and 9-36V Phoenix power
CPU Type Celeron
The Partaker A22 is a 21.5 inch industrial all-in-one computer built around an Intel Celeron J6413 processor with 32GB DDR4 memory and a 512GB SATA SSD. Its full-flat resistive touchscreen carries an IP65 rating on the front bezel, making the unit suitable for factory floors, kiosks and other environments where dust and water jets are a concern. Windows 11 Pro comes pre-installed for immediate deployment.
An aluminium alloy chassis replaces active fans, so the system runs without audible noise while dissipating heat from the J6413 and its Intel UHD Graphics. The wide 9-36V DC input accepts a 12V 5A adapter or direct industrial power, and the TPM 2.0 module adds hardware-based security without increasing power draw. Typical idle consumption stays low, supporting continuous 7×24 operation in noise-sensitive areas.
Under prolonged workloads the fanless design relies on surface airflow to keep internal temperatures stable up to 50 °C ambient for commercial-grade use. The resistive touch panel is rated for more than 50 million touches, and the three Intel 1000M LAN ports maintain network throughput during extended data logging or HMI tasks. Throttling only engages if the thermal envelope is exceeded, preserving long-term reliability.
| Model | A22-New-J6412-32G512G |
|---|---|
| Form Factor | All-in-One |
| Operating System | Windows 11 Pro |
| CPU Type | Celeron |
| GPU/VGA Type | Intel UHD Graphics |
| Memory Capacity | 32GB DDR4 |
| Maximum Memory Supported | 32 GB |
| SSD | 512GB |
| HDD | No |
| Screen Size | 21.5" |
| Touchscreen | Yes |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Cut a 528 x 320 mm opening, insert the unit from the front, and secure the supplied brackets; the step often missed is tightening all four brackets evenly so the IP65 gasket seals uniformly.
It has one M.2 2280 SATA SSD slot and one 2.5" SATA bay; both support SATA drives only, so future capacity increases must use SATA M.2 or 2.5" SATA devices.
The fanless aluminium chassis is rated for sustained 7×24 operation up to 50 °C commercial or 60 °C with an industrial SSD; beyond that the CPU will throttle to protect itself.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?