partaker A7 all-in-one PC 15.6" i5-1135G7 32GB DDR4 512GB SSD 1TB HDD

Industrial all-in-one with IP65 front panel

The Partaker A7 is a 15.6-inch TFT LED panel PC built for continuous industrial use. An Intel Core i5-1135G7 processor and 32GB of DDR4-3200 memory run Windows 11 Pro on a fanless aluminium chassis. Storage combines a 512GB M.2 SSD with a 1TB 2.5-inch SATA drive. The 5-wire resistive touchscreen is rated for 35 million touches and operates in high-temperature conditions.

Check power mounting and expansion needs

Verify that a 12V DC supply fed from 100-240V AC suits your cabinet wiring. The front panel requires an opening of 386.5 by 236mm for embedded mounting; VESA or desktop brackets are alternatives. Confirm the operating temperature ceiling matches your site: 0 to 50°C with the SSD installed, 0 to 40°C when the hard drive is active. Two M.2 slots accept a WIFI6 module or a 5G modem with a SIM card if wireless connectivity is required.

Replaces legacy panel PCs needing sealed touch

This unit upgrades older HMIs that lack IP65 ingress protection or rely on noisy fans. The jump is justified when a resistive screen must survive gloved use, chemical splash, or 35 million actuation cycles. Fanless cooling removes a moving-part failure point for 7x24 duty. Buyers who need a capacitive multi-touch interface or a brighter display than 250cd/m² should look elsewhere.