我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Square 1.3 inch colour LCD breakout board with 240 by 240 pixel display and pin headers

Pimoroni

Pimoroni PIM476 1.3" 240x240 SPI Colour LCD Breakout 3.3V 5V

SKU CH-711B-JEEN9

A 1.3-inch colour LCD with 240x240 resolution, SPI interface and 3.3V or 5V operation for Raspberry Pi and Arduino projects

  • Crisp 240x240 IPS colour on a 1.3" square display
  • SPI interface keeps wiring simple for microcontroller projects
  • Works at 3.3V or 5V logic without extra level shifters
  • Reverse polarity protection guards the board against accidental mis-wiring
  • Compatible with every Raspberry Pi model, Pico and Arduino boards

Compact square display for Pi and Arduino projects

This 1.3 inch colour LCD has a 240 by 240 pixel IPS panel and connects over SPI. It runs at 3.3 volts or 5 volts and includes reverse polarity protection. The breakout works with every Raspberry Pi model and with Arduino boards.

Check SPI pins and voltage level before wiring

Confirm your board exposes the required SPI lines and that the logic level matches the 3.3 volt or 5 volt supply you plan to use. No extra driver chips are mentioned, so the host must drive the display directly.

Low power draw keeps thermals simple

The small panel and SPI interface draw little current, so the board runs cool without a heatsink or fan. Reverse polarity protection guards against accidental supply reversal during development.

商品特色

  • Crisp 240x240 IPS colour on a 1.3" square display
  • SPI interface keeps wiring simple for microcontroller projects
  • Works at 3.3V or 5V logic without extra level shifters
  • Reverse polarity protection guards the board against accidental mis-wiring
  • Compatible with every Raspberry Pi model, Pico and Arduino boards

商品規格

本商品目前尚未公佈規格。

商品問答

Does the PIM476 breakout include header pins or do I need to buy them separately?

The board ships as a bare PCB so you will need to source and solder your own header pins or wires.

Should I choose the 3.3 V or 5 V logic level for my Raspberry Pi Pico project?

The display works with either 3.3 V or 5 V logic so you can match the Pico's 3.3 V directly without a level shifter.

What does the 240x240 pixel resolution mean for text and graphics on the 1.3" screen?

At 240 by 240 pixels on a 1.3" IPS panel you get sharp, square pixels suitable for small fonts and simple graphics.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。