我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips and gold contacts

Qnap

Qnap RAM-4GDR4A1-UD-2400 4GB DDR4 2400MHz UDIMM

SKU CH-11NX-WZCD8

4GB DDR4 desktop module running at 2400MHz with CL17 latency and 1.20V operation

  • 4 GB capacity adds responsive multitasking headroom
  • DDR4 at 2400 MHz delivers fast data throughput
  • Low 1.20 V operation reduces system power draw
  • CL17 latency keeps access times tight
  • 288-pin UDIMM fits standard desktop slots

Capacity and fit

This single 4 GB DDR4 UDIMM runs at 2400 MHz with CL17 latency and 1.20 V operation. The 288-pin DIMM follows the PC4-19200 standard and uses non-ECC unbuffered signal processing. It suits desktop systems that accept standard DDR4 memory in a single-channel or dual-channel layout.

Sustained load behaviour

The module operates at its rated 2400 MHz without overclocking headroom, so throughput remains steady during long workloads. Non-ECC unbuffered design means the memory controller handles refresh cycles directly, which is typical for consumer desktop platforms. Thermal output stays modest at the standard 1.20 V level.

Compatibility checklist

Verify that the motherboard supports DDR4 UDIMMs at 2400 MHz and can run non-ECC unbuffered modules. Confirm an available 288-pin DIMM slot and that the BIOS recognises PC4-19200 speeds. Systems limited to lower speeds will downclock the module automatically.

商品特色

  • 4 GB capacity adds responsive multitasking headroom
  • DDR4 at 2400 MHz delivers fast data throughput
  • Low 1.20 V operation reduces system power draw
  • CL17 latency keeps access times tight
  • 288-pin UDIMM fits standard desktop slots

商品規格

BrandQNAP Systems

商品問答

How much power does the 1.20 V DDR4 module draw when the system runs all day?

The module operates at 1.20 V, which is the standard DDR4 voltage, keeping power draw and heat low during continuous use.

What motherboard slot is required for this 288-pin UDIMM to work?

It needs a standard DDR4 DIMM slot that accepts 288-pin unbuffered non-ECC memory.

Will the CL17 2400 MHz stick run stably alongside older DDR4 modules in the same board?

The motherboard will clock all installed DDR4 to the lowest common speed and latency, so this CL17 2400 MHz module will down-clock to match slower sticks.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。