我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular black metal PSU with mesh front and modular cable sockets visible

Rosewill

Rosewill CMG850 850 W ATX 3.0/3.1 80+ Gold full modular power supply

SKU CH-RDGV-FBTX6 MPN CMG850

An 850 W ATX 3.0 and 3.1 compatible unit with 80 PLUS Gold efficiency, a single 12 V rail, full modular cables and a 120 mm FDB fan in a 140 mm chassis

  • TypeATX 3.0 Compatible / ATX 3.1 Compatible
  • Maximum Power850 W
  • Fans1 x Silent 120mm FDB fan
  • PFCActive
  • Main Connector20+4Pin
  • +12V RailsSingle
  • 850 W single 12 V rail powers demanding builds
  • ATX 3.0 and 3.1 compatible for modern GPUs
  • Full modular cabling reduces clutter inside the case
  • 120 mm FDB fan runs quiet under load
  • 80 PLUS Gold certification delivers up to 92 % efficiency

850 W ATX 3.0/3.1 power supply

The Rosewill CMG850 delivers up to 850 W through a single +12 V rail. It carries 80 PLUS Gold certification with up to 92 % efficiency. The fully modular design lets builders connect only the cables their system needs. It targets desktop builders who want a compact, high-efficiency unit for modern graphics cards and multi-drive configurations.

ATX 3.0 and 3.1 compatibility

This unit meets both ATX 3.0 and ATX 3.1 specifications for transient response and power-excursion handling. A single strong 12 V rail simplifies load balancing across high-end GPUs. The 140 mm length fits many smaller cases where longer units would not. Hold-up time is rated at 16 ms minimum and power-good signal at 1-100 ms.

Four PCIe connectors and nine SATA ports

Four 6+2-pin PCIe connectors support multi-GPU SLI or CrossFire setups. Nine SATA power connectors provide ample drive capacity for storage-heavy builds. Two 4+4-pin EPS connectors feed modern motherboards. The 120 mm FDB fan runs silently while the 100-240 V active PFC input handles global mains without a switch.

商品特色

  • 850 W single 12 V rail powers demanding builds
  • ATX 3.0 and 3.1 compatible for modern GPUs
  • Full modular cabling reduces clutter inside the case
  • 120 mm FDB fan runs quiet under load
  • 80 PLUS Gold certification delivers up to 92 % efficiency

商品規格

BrandRosewill
ModelCMG850
TypeATX 3.0 Compatible / ATX 3.1 Compatible
Maximum Power850 W
Fans1 x Silent 120mm FDB fan
PFCActive
Main Connector20+4Pin
+12V RailsSingle
PCI-Express Connector4 x 6+2-Pin
SATA Power Connector9
SLISLI Ready
CrossFireCrossFire Ready
Max PSU Length140 mm
ModularFull Modular
Power Good Signal1-100ms
Hold-up Time16ms min.
EfficiencyUp to 92%
Energy-Efficient80 PLUS GOLD Certified
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Output+3.3V@18A, +5V@18A, [email protected] , [email protected] , [email protected]
MTBF>100,000 Hours
ApprovalscTUVus, FCC certified
Connectors1 x 20+4-Pin Main Connector
2 x 4+4-Pin ATX12V / EPS12V Connector
4 x 6+2-Pin PCI-E Connector
9 x SATA Connector
4 x 4-Pin Peripheral Connector
Features80 PLUS GOLD Certified
Compact 140mm size
850 Watts Max Power
Single strong 12V rail - ideal for Gaming system
SLI & CrossFire ready - 2 x 6+2-Pin Connector
1 x Silent 120mm FDB Fan
Active-PFC with auto AC-input voltage adjustment (100 - 240V)
Over Temperature Protection / Over Current Protection / Over Voltage Protection / Power Protection, Under Voltage Protection, and Short Circuit Protection provide maximum safety to your critical system components
Safety & EMI Approval: cTUVus, FCC
Dimensions3.39" x 5.91" x 5.51"
出貨重量2.84 kg
包裝尺寸290 × 226 × 117 mm

商品問答

What does the 850 W rating mean once the unit is installed in a PC?

The single 12 V rail can deliver the full 850 W to graphics cards and CPU, so high-end gaming builds draw their peak power without rail balancing limits.

What does ATX 3.0 / 3.1 compatibility cap in practice?

The platform supports the 12 VHPWR power-excursion and timing requirements defined by ATX 3.0 and 3.1, allowing modern GPUs to trigger transient spikes within the spec window.

What clearance does the 140 mm length need in a case?

The chassis must provide at least 140 mm of depth from the PSU mounting face to any drive cage or cable routing barrier for the unit to fit.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。