sakose
sakose 12025-LED 120mm case fan 15 LED 1100 RPM 18 dBA 6 pack
Six 120 mm fans with 15 white LEDs each, running at 1100 RPM and 18 dBA
- ColorWhite
- LEDWhite
Option 6 Packs
- 1 Pack
- 2 Fans, No Controller
- 3 Packs
- 4 Heads
- 5 Packs
- 6 Packs
- Six-pack value for full-case airflow
- 15 white LEDs per fan create bright interior lighting
- Hydraulic bearing runs at 18 dBA for quiet operation
- 1100 RPM speed delivers steady cooling performance
- Anti-vibration rubber pads reduce chassis resonance
Six-pack 120 mm case fans
This set contains six 120 mm case fans with hydraulic bearings and a 4-pin Molex power connector. Each unit runs at 1100 RPM and produces 18 dBA of noise. Fifteen white LEDs per fan create a uniform lighting effect inside the chassis.
Upgrade from stock or sleeve-bearing fans
The hydraulic bearing and revised blade curve raise airflow while keeping sound low, making the jump worthwhile when stock coolers become audible or when a build needs consistent white illumination across multiple mounts. Anti-vibration rubber pads are included to reduce chassis resonance.
Sustained-load behaviour
The sealed bearing structure resists dust ingress so rotational stability is maintained during long sessions. Frame cut-backs on both sides of the housing preserve air volume over time, and the 12 VDC Molex supply delivers steady power without PWM signalling overhead.
商品特色
- Six-pack value for full-case airflow
- 15 white LEDs per fan create bright interior lighting
- Hydraulic bearing runs at 18 dBA for quiet operation
- 1100 RPM speed delivers steady cooling performance
- Anti-vibration rubber pads reduce chassis resonance
商品規格
| Brand | Sakose |
|---|---|
| Color | White |
| LED | White |
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
sakose 12025-LED 120mm case fan 15 LEDs 16dB 1100RPM 12VDC Molex 4-pin blue (6-pack)
- Blue
- Blue
商品問答
Does the 120mm frame fit a standard 120mm mounting hole pattern?
Yes, the 120mm frame matches the standard 120mm mounting holes used on most chassis and radiators.
How do I connect the Molex 4-pin plug and the rubber pads?
Plug the Molex 4-pin connector into a power supply Molex lead, then press the four anti-vibration rubber pads onto the fan corners before screwing the fan down.
When should I expect the hydraulic bearing to need replacement?
The sealed hydraulic bearing is designed for long life; replace the fan if noise rises above the rated 18 dBA or speed drops below 1100 RPM.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








