我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

SAMSUNG

SAMSUNG M378A2G43AB3-CWE 16GB DDR4 3200 desktop RAM

SKU CH-BGMS-J90KH

16 GB DDR4 3200 desktop module with CL22 latency, 1.2 V operation and 288-pin unbuffered design

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered / Unregistered
  • 16 GB capacity handles multitasking workloads smoothly
  • DDR4 3200 speed delivers 25600 MB/s bandwidth
  • CL22 latency keeps response times predictable
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

16GB DDR4 3200 UDIMM

This Samsung module delivers 16GB of DDR4 memory at 3200 MT/s with a CL22 latency. It operates at the standard 1.20V and uses an unbuffered 288-pin UDIMM form factor. The green PCB carries sixteen chips in a 1Rx8 layout without a heat spreader or lighting.

Suits standard desktop upgrades.

The stick fits mainstream consumer motherboards that accept non-ECC unbuffered DDR4 DIMMs. It will not work in servers or workstations that require registered or error-correcting memory. Systems limited to lower DDR4 speeds will run the module at the highest supported rate.

Simple press-in install; watch for key alignment

Installation requires aligning the notch with the slot key and pressing firmly until the retention clips click. The most common issue is the module not seating fully, which prevents the system from posting. Ensure the motherboard firmware is current if the rated speed does not appear automatically.

商品特色

  • 16 GB capacity handles multitasking workloads smoothly
  • DDR4 3200 speed delivers 25600 MB/s bandwidth
  • CL22 latency keeps response times predictable
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

商品規格

BrandSAMSUNG
ModelM378A2G43AB3-CWE
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered / Unregistered
ColorGreen
Heat SpreaderNo
LED ColorNone

商品問答

Does this 288-pin UDIMM require a motherboard with DDR4 slots?

Yes, the module uses the standard 288-pin DDR4 UDIMM form factor and 1.20V operation, so it fits any desktop board with DDR4 DIMM slots.

Will this 3200 CL22 stick run at its rated speed if I keep my older DDR4 modules installed?

The system will typically clock all modules to the speed of the slowest installed kit; this stick is rated for 3200 at CL22 and 1.20V.

How can I confirm the module is running at 3200 with CL22 timings after installation?

Check the memory tab in CPU-Z or your BIOS/UEFI main screen; it should report 3200 MT/s and CAS latency 22 for this 16GB module.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。