BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
SAMSUNG
A 16 GB DDR4 dual-channel kit running at 2666 MHz with CL19 timing for desktop upgrades
This 16 GB kit uses two 8 GB DDR4 modules rated at 2666 MHz with CAS latency 19. It is built for desktop PCs and servers that accept standard 288-pin DIMMs and run at 1.2 V. The black modules suit general office workloads, light content creation and everyday multitasking.
Align the notch on each module with the slot key, press down firmly until the retention clips click, then power on. The kit runs at the JEDEC-standard 1.2 V so no manual voltage adjustment is required. If the system does not post, reseat both sticks and test them one at a time to isolate a faulty module or a bad slot.
Verify that your board accepts DDR4 memory in 288-pin DIMM form and has at least two free slots for dual-channel operation. Confirm the maximum supported speed and total capacity in the motherboard manual, because exceeding those limits can prevent boot or force a lower speed. Systems that require ECC or registered memory will not work with this non-ECC unbuffered kit.
本商品目前尚未公佈規格。
Open Task Manager or BIOS and verify the memory speed shows 2666 MHz; the modules are rated for that clock speed out of the box.
The box contains two 8 GB DDR4 288-pin DIMMs in black; no additional cables, brackets or coolers are required for standard desktop installation.
The 2 x 8 GB kit enables dual-channel operation on most desktop boards, giving higher bandwidth than a single 16 GB stick at the same 2666 MHz rating.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?