Seagate
Seagate IronWolf Pro ST6000NE0023 6TB 3.5" SATA 7200rpm 256MB internal hard drive
6 TB 3.5" SATA internal hard drive spinning at 7 200 rpm with 256 MB cache, built for multi-bay NAS using AgileArray balancing and RAID optimisation
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity6TB
- NAND Flash Memory TypeHard Drive
- RPM7200 RPM
- Cache256MB
- 6 TB capacity for large NAS storage pools
- 7200 RPM spindle speed for fast data access
- 256 MB cache buffer improves burst performance
- AgileArray firmware optimises RAID and power management
- 5" SATA 6.0 Gb/s interface fits standard drive bays
NAS-Ready 6 TB CMR Drive
The Seagate IronWolf Pro ST6000NE0023 is a 6 TB 3.5" internal hard drive built for multi-bay NAS enclosures. It spins at 7200 RPM with a 256 MB cache and uses Conventional Magnetic Recording for consistent write performance. The SATA 6.0 Gb/s interface fits standard drive bays and hot-swap trays in home or small-business servers. It is designed for always-on workloads in RAID arrays.
AgileArray Firmware and Physical Fit
AgileArray firmware adds dual-plane balancing and RAID optimisation to reduce vibration in crowded chassis. Advanced power management lowers heat and acoustic output during idle periods. The bare drive measures 26.11 mm high, 101.85 mm wide and 146.99 mm long, weighing approximately 1.55 lb. Hot-plug support allows drive replacement without shutting down the NAS.
Verify Bay Count and RAID Plan
Confirm your NAS has a free 3.5" SATA bay and that the controller supports the desired RAID level for a 6 TB volume. Check that the power supply can deliver adequate current for an additional 7200 RPM spindle. Buyers needing hardware encryption or a five-year data-recovery service should look at other IronWolf Pro SKUs. Ensure your backup strategy covers the full capacity before deploying.
商品特色
- 6 TB capacity for large NAS storage pools
- 7200 RPM spindle speed for fast data access
- 256 MB cache buffer improves burst performance
- AgileArray firmware optimises RAID and power management
- 5" SATA 6.0 Gb/s interface fits standard drive bays
商品規格
| Brand | Seagate |
|---|---|
| Series | IronWolf Pro |
| Model | ST6000NE0023 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 6TB |
| NAND Flash Memory Type | Hard Drive |
| RPM | 7200 RPM |
| Cache | 256MB |
| Average Latency | 4.16ms |
| Features | Optimized for NAS with AgileArray. AgileArray enables dual-plane balancing and RAID optimization in multi-bay environments, with the most advanced power management possible. Actively protect your NAS with IronWolf Health Management focusing on prevention, intervention, and recovery. High performance means no lag time or downtime for users during workload traffic for the NAS. Seagate leads the competition with the highest-performing NAS drive portfolio. Seagate Rescue Data Recovery. IronWolf Pro comes with extra peace of mind for any mechanical, accidental, or natural disaster. With a |
| Usage | Enterprise NAS Hard Drives |
| Form Factor | 3.5" |
| Height (maximum) | 26.11mm |
| Width (maximum) | 101.85mm |
| Length (maximum) | 146.99mm |
| 出貨重量 | 0.71 kg |
| 包裝尺寸 | 163 × 133 × 33 mm |
商品問答
What does the SATA 6.0Gb/s interface cap in practice?
The SATA 6.0Gb/s interface caps the maximum theoretical transfer rate at 6.0Gb/s; real-world sequential speeds are limited by the 7200 RPM mechanical design and 256MB cache.
What physical space does the 3.5" drive need to fit or mount?
The drive measures 146.99mm long, 101.85mm wide and 26.11mm high, matching standard 3.5" drive bays with a 1.55 lb weight.
How is the drive installed and what step do people get wrong?
Mount the 3.5" drive in a bay, connect the SATA data and power cables, then enable hot-plug in the BIOS or RAID controller so the drive is recognised on insertion.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
