我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Seagate

Seagate ST300MM0008 300GB 10000RPM 12Gbps SAS 2.5" internal hard drive

SKU CH-6PHK-E90C2

300 GB enterprise SAS drive spins at 10,000 RPM with a 128 MB cache and 12 Gbps interface

  • 300GB capacity stores enterprise workloads
  • 10000RPM spindle speed accelerates data access
  • 12Gbps SAS interface enables high-throughput transfers
  • 128MB cache buffers intensive I/O operations
  • 5-inch form factor fits dense server bays

Enterprise 300GB 10K SAS Drive

The Seagate ST300MM0008 is a 300GB 2.5-inch internal hard drive spinning at 10000RPM with a 12Gbps SAS interface and 128MB cache. It is built for enterprise servers and storage arrays that demand consistent throughput and low latency. The bare-drive form factor fits standard hot-swap bays in rackmount and tower chassis. New condition ensures full manufacturer-rated reliability from first power-on.

Suited for high-IOPS workloads

This drive suits database servers, virtualization hosts and transaction-heavy applications that benefit from 10K spindle speed and 12Gbps SAS bandwidth. It is not for systems requiring capacities above 300GB, nor for platforms limited to slower SAS link speeds. Buyers needing silent desktop storage or USB connectivity should look elsewhere.

12Gbps SAS interface decides fit

The single specification that determines compatibility is the 12Gbps SAS interface; the host controller and backplane must support this link rate to realise the drive's rated performance. A 6Gbps SAS environment will operate the drive at the lower speed, reducing peak throughput. Verify controller and cable specifications before purchase.

商品特色

  • 300GB capacity stores enterprise workloads
  • 10000RPM spindle speed accelerates data access
  • 12Gbps SAS interface enables high-throughput transfers
  • 128MB cache buffers intensive I/O operations
  • 5-inch form factor fits dense server bays

商品規格

本商品目前尚未公佈規格。

商品問答

Will this 2.5-inch SAS drive fit a standard 2.5-inch drive bay or caddy?

Yes, the 2.5-inch form factor matches standard 2.5-inch bays and hot-swap caddies used in servers and storage arrays.

What is the correct way to connect the 12Gbps SAS interface during installation?

Attach the SAS data and power connectors firmly to the backplane or controller; the common mistake is leaving the dual-port SAS connector partially seated.

When should the 128MB cache drive be replaced in a RAID array?

Replace it when SMART reports reallocated sectors or the RAID controller flags predictive failure, typically after several years of 10000RPM operation.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。