我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Silverstone

Silverstone GM600-2UG-V2 600W 2U redundant server power supply

SKU CH-243Q-88SRP MPN GM600-2UG-V2

A 600W 2U redundant server power supply with 80 PLUS Gold efficiency, active PFC, single +12V rail and full protection suite

  • TypeRedundant Power Supply
  • Single/RedundantRedundant
  • Form Factor1+1 2U redundant form factor
  • Maximum Power600W
  • Fans40mm PWM fans
  • Main Connector20+4Pin
  • Redundant 2U design keeps servers running if one module fails
  • 600W output with single +12V rail delivers 50A for high-end components
  • 80 PLUS Gold and Cybenetics Gold certifications cut waste heat and electricity cost
  • 40mm PWM fans limit noise to 62.5 dBA while cooling efficiently
  • Japanese electrolytic capacitors and full protection suite guard against over-current, over-voltage.

Redundant 2U server power supply

The Silverstone GM600-2UG-V2 is a 600W redundant power supply built for 2U rackmount servers. It uses a 1+1 form factor with hot-swap modules so a failed unit can be replaced without downtime. Active PFC maintains a power factor above .9 at full load across a 90 to 264 V input range.

Replaces single non-redundant units

This supply upgrades a standard single PSU when continuous uptime is the priority. The jump is worth it for workloads that cannot tolerate a power-module failure, such as always-on compute or storage nodes. Cybenetics Gold certification guarantees efficiency between 87 and 89 percent, lowering waste heat compared with uncertified designs.

Fits 2U bays with pull-out handles

Each module measures 84mm wide by 82mm high by 217mm deep and slides into a redundant chassis on integrated handle bars. Four 40mm PWM fans provide cooling at up to 62.5 dBA maximum. Cabling includes a 24/20-pin motherboard connector, two EPS 4+4-pin cables, two PCIe 6+2-pin cables, six SATA connectors and nine peripheral connectors. A single +12V rail delivers 50A for high-current components. MTBF exceeds 100000 hours.

商品特色

  • Redundant 2U design keeps servers running if one module fails
  • 600W output with single +12V rail delivers 50A for high-end components
  • 80 PLUS Gold and Cybenetics Gold certifications cut waste heat and electricity cost
  • 40mm PWM fans limit noise to 62.5 dBA while cooling efficiently
  • Japanese electrolytic capacitors and full protection suite guard against over-current, over-voltage.

商品規格

BrandSilverStone
ModelGM600-2UG-V2
TypeRedundant Power Supply
Single/RedundantRedundant
Form Factor1+1 2U redundant form factor
Maximum Power600W
Fans40mm PWM fans
Main Connector20+4Pin
Output Current25A@+3.3V, 25A@+5V, 50A@+12V, 3.5A@+5VSB, 0.8A@-12V
Input Voltage90 - 264 V
Input Frequency Range47 - 63 Hz
+12V RailsSingle
PFCActive PFC (PF>0.9 at full load)
MTBF>100,000 Hours
Energy-Efficient80 PLUS GOLD Certified
Efficiency>=87% & <89% overall efficiency with single modular power supply
PSU Noise Level62.5 dBA maximum
ProtectionOver Current Protection
Over Voltage Protection
Short Circuit Protection
Over Temperature Protection
Connectors1 x 24 / 20-Pin motherboard connector
2 x 8 / 4-Pin EPS / ATX 12V connectors
2 x 8 / 6-Pin PCIe connectors
6 x SATA connectors
9 x 4-Pin Peripheral connectors
1 x 4-Pin Floppy connector
1 x 2-Pin TTL connector
1 x 2-Pin PW1 connector
1 x 2-Pin PW2 connector
1 x PM Bus connector
Cable Spec1 x MB 24/20pin cable
2 x CPU 4+4pin cable
2 x PCI-E 6+2pin cable
1 x Cable (3 x Peripheral 4pin connector + 1 x 4pin Floppy connector per cable)
2 x Cable (3 x Peripheral 4pin connector per cable)
2 x SATA Cable (3 connector per cable)
1 x PMBUS cable
1 x 2-pin Total PFD cable
1 x 2-pin PW1 cable
1 x 2-pin PW2 cable
Dimensions102 x 82 x 231 mm (Housing with bracket, without handle)
84 x 82 x 217 mm (Housing without bracket)
78 x 39 x 190 mm (Module only without handle)
Weight6.9 lbs.
TemperatureOperating temperature 0°C ~ 45°C
出貨重量4.08 kg
包裝尺寸406 × 203 × 152 mm

商品問答

What chassis depth is required for the 2U redundant form factor measuring 84mm by 82mm by 217mm?

The unit is 217mm deep, so the rack or chassis must provide at least that much clear depth behind the mounting ears.

How are the two hot-swap modules inserted and what step is often missed?

Slide each module in until the latch clicks; the step people miss is fully seating the 2-pin TTL signal cable so the redundancy monitor works.

When should the 40mm PWM fans be cleaned or replaced?

Clean dust from the fans every 6 to 12 months; the MTBF rating exceeds 100,000 hours, so replacement is rarely needed during normal service life.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。