我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Simmtec, Inc

Simmtec, Inc 1 GB DDR2 PC2-6400 CL=6 240-pin DIMM desktop RAM

SKU CH-3754-M0TMX

1 GB DDR2 desktop module running at 800 MHz with CL6 timing and 1.8 V operation

  • Capacity1GB
  • 1 GB capacity speeds up everyday tasks
  • DDR2-800 clock delivers 6400 MB/s bandwidth
  • CL6 latency keeps data flowing quickly
  • 240-pin DIMM fits standard desktop slots
  • 8 V operation matches legacy platform specs

1 GB DDR2 desktop DIMM

This Simmtec module adds 1 GB of DDR2 memory to a desktop computer. It is intended for owners of older systems that use 240-pin DIMM slots and want a straightforward capacity increase for everyday tasks.

PC2-6400 CL=6 speed rating

The single specification that determines fit is the PC2-6400 CL=6 rating, which corresponds to DDR2-800 operation at CL6 latency. Your motherboard must support this exact speed grade and timing for the module to run at its rated performance.

Simple slot insertion

Installation consists of aligning the notch on the 240-pin edge connector with the key in the DIMM slot and pressing firmly until the retention clips click. The most common issue is a mismatched speed grade or voltage requirement, which can prevent the system from posting or cause the memory to run at a lower speed.

商品特色

  • 1 GB capacity speeds up everyday tasks
  • DDR2-800 clock delivers 6400 MB/s bandwidth
  • CL6 latency keeps data flowing quickly
  • 240-pin DIMM fits standard desktop slots
  • 8 V operation matches legacy platform specs

商品規格

Capacity1GB

商品問答

What real-world bandwidth does the PC2-6400 rating deliver in a desktop?

The PC2-6400 rating corresponds to a peak transfer rate of 6400 MB/s when the module runs at DDR2-800 speeds.

How does the DDR2 interface and CL=6 latency affect usable performance?

DDR2-800 with CL=6 timing provides a theoretical maximum of 6400 MB/s; actual throughput depends on the motherboard's memory controller and BIOS settings.

Will this 240-pin DIMM fit my desktop motherboard's memory slots?

The module uses the standard 240-pin DDR2 DIMM form factor and requires a desktop board with DDR2 slots keyed for 1.8 V unbuffered non-ECC memory.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。