BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Simmtec, Inc
A 16 GB dual-channel DDR3 kit running at 1600 MHz with CL11 timings and 1.35 V low-voltage operation for reduced power draw and heat
This 16GB kit contains two 8GB DDR3 UDIMM modules rated at 1600MHz with CL11 latency. It is designed for desktop systems that use 240-pin unbuffered memory slots. The low operating voltage of 1.35V makes it suitable for builds where reduced power draw is a priority.
Running at 1.35 volts lowers hardware power consumption by up to 20% compared with standard-voltage DDR3 modules. The lower energy draw also reduces waste heat, helping to keep the system cooler during long workloads. Each module is built from selected original components and 100% tested for stability and compatibility.
The memory operates at DDR3 1600 (PC3 12800) with a CAS latency of 11. This speed rating determines whether the kit matches the motherboard's supported memory standard. Verify that the platform accepts DDR3 1600 unbuffered UDIMMs before purchase.
| Capacity | 16GB (2 x 8GB) |
|---|---|
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
No firmware or component swaps are required; the 240-pin DDR3 modules are 100% tested at the factory and carry a lifetime warranty once registered on the manufacturer's site.
The CAS latency of CL11 at 1600MHz sets the timing ceiling; sustained workloads will hit that latency boundary before any other spec limit is reached.
Operating at 1.35V cuts power draw by up to 20% versus standard voltage DDR3, which also reduces waste heat during extended use.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?