BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Simmtec, Inc
A 32 GB DDR3 kit with four 8 GB modules running at 1866 MHz, 10-11-10-30 timings and 1.5 V, fitted with red heatspreaders
This kit provides 32GB of DDR3 memory across four 8GB modules rated at 1866MHz with timings of 10-11-10-30. It is designed for systems using LGA 1155, LGA 1156, LGA 1366, LGA 2011 or AMD FM1 sockets. Buyers upgrading AM3+ systems or boards requiring different voltage should look elsewhere.
Each module is tested before shipping to reduce the risk of crashes or errors during extended operation. The XMP ready design allows the memory to run at its rated 1866MHz frequency consistently when the profile is enabled in the BIOS. Unbuffered non-ECC architecture suits standard desktop workloads without server-grade overhead.
The modules operate at 1.5V, limiting power draw and heat output under normal use. Red anodised heatspreaders dissipate thermal energy across the 240-pin DIMMs to maintain stable temperatures. This passive cooling keeps noise at zero since no active fans are required on the memory itself.
| Capacity | 32GB (4 x 8GB) |
|---|
Each stick runs at the standard 1.5 V for DDR3 and carries a red heatspreader that helps dissipate the heat generated at 1866 MHz, so the kit adds only the normal thermal load of four unbuffered DIMMs.
The memory needs a board with four DDR3 240-pin slots and a processor that supports the LGA 1155, LGA 1156, LGA 1366, LGA 2011 or AMD FM1 platform, because the modules are programmed for those sockets.
The kit is rated for 1866 MHz at 10-11-10-30; when mixed with slower DDR3 the system will typically run all modules at the lowest common speed and loosest timings.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?