SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00503332BTC
現貨
SK hynix
SK hynix 16GB (2 x 8GB) DDR4 2666 desktop RAM
16 GB dual-channel kit at 2666 MHz with CL19 timing and 1.2 V operation
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2666 (PC4 21300)
- 16 GB dual-channel kit doubles bandwidth for smoother multitasking
- DDR4 2666 MT/s data rate keeps pace with mainstream desktop workloads
- CL19 latency at 0.75 ns cycle time delivers responsive system performance
- 20 V operating voltage reduces power draw and heat output
- 288-pin unbuffered non-ECC DIMMs install directly in standard desktop slots
16GB DDR4 2666 Dual-Channel Kit
This 16GB kit pairs two 8GB SK hynix DDR4 modules rated at 2666MHz. The PC4-21300 specification delivers standard desktop bandwidth for everyday workloads. Non-ECC unbuffered design suits mainstream consumer motherboards. CL19 latency and 1.2V operation keep timing and power within normal limits.
Suits Standard Desktop Upgrades
Builders repairing or upgrading a DDR4 system that accepts 288-pin DIMMs at 2666MHz will find this kit compatible. Users needing ECC error correction, registered modules, higher frequencies, lower latencies, or capacities beyond 16GB should select different memory. The 1Rx8 organisation and 0.75ns cycle time match typical consumer platform expectations.
DDR4 2666MHz Speed Rating
The decisive specification is the 2666MHz data rate (PC4-21300). Motherboards that officially support DDR4-2666 will run these modules at rated speed without manual adjustment. Systems limited to lower DDR4 speeds will downclock automatically, while boards requiring faster memory will not reach their target frequency with this kit.
商品特色
- 16 GB dual-channel kit doubles bandwidth for smoother multitasking
- DDR4 2666 MT/s data rate keeps pace with mainstream desktop workloads
- CL19 latency at 0.75 ns cycle time delivers responsive system performance
- 20 V operating voltage reduces power draw and heat output
- 288-pin unbuffered non-ECC DIMMs install directly in standard desktop slots
商品規格
| Brand | SK Hynix |
|---|---|
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
商品問答
Will the 288-pin DIMM modules fit my standard desktop motherboard slots?
Yes, each 8 GB stick uses the 288-pin DDR4 form factor that matches every current desktop DIMM slot.
What is the correct way to seat the modules so the CL19 timing is recognised?
Align the notch with the slot key, press straight down until both side clips click, then enable XMP or set 2666 MHz manually in BIOS.
Do these non-ECC unbuffered modules need any periodic maintenance or replacement?
No routine maintenance is required; the 1.20 V DDR4 chips are rated for continuous operation and carry a lifetime warranty from SK hynix.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
