我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with a 22-pin SATA connector and mSATA slot

SMUGDESK

SMUGDESK mSATA to 2.5" SATA II 22-Pin Adapter

SKU CH-KB1Q-FW58Y

Converts an mSATA SSD to a standard 2.5 inch SATA drive for desktop or notebook installation

  • Converts mSATA SSD to standard 2.5 inch SATA drive
  • Fits desktop or notebook 2.5 inch SATA bay
  • SATA II signal circuit enables reliable boot and data
  • Mounting holes secure adapter inside standard drive bay
  • Reuses existing mSATA SSD without new SATA hardware purchase

mSATA to 2.5" SATA II Adapter

This SMUGDESK adapter converts a Mini PCIe mSATA solid-state drive into a standard 2.5-inch SATA II 22-pin storage device. It lets you repurpose an existing mSATA SSD for use in any desktop or laptop that accepts a regular 2.5-inch SATA drive. No extra driver software is required for operation.

Suits owners of spare mSATA SSDs

Builders who have a surplus mSATA SSD and an available 2.5-inch SATA bay can install the drive without buying new SATA storage hardware. The adapter supports system booting and steady read-write performance through its built-in SATA II signal conversion circuit. Users who lack an mSATA drive or a free 2.5-inch SATA bay cannot use this product.

SATA II 22-pin interface

The adapter presents a standard 22-pin SATA II connector that carries both data and power for the converted mSATA SSD. Mounting holes on the PCB allow secure fixation inside a standard 2.5-inch drive bay to prevent loose connections from vibration. Installation is completed by inserting the mSATA SSD, securing it with the retention screw, and attaching standard SATA cables.

商品特色

  • Converts mSATA SSD to standard 2.5 inch SATA drive
  • Fits desktop or notebook 2.5 inch SATA bay
  • SATA II signal circuit enables reliable boot and data
  • Mounting holes secure adapter inside standard drive bay
  • Reuses existing mSATA SSD without new SATA hardware purchase

商品規格

本商品目前尚未公佈規格。

商品問答

How do I install the mSATA SSD onto the adapter and connect it inside a 2.5 inch drive bay?

Insert the mSATA SSD into the Mini PCIe slot on the adapter and secure it with the retention screw, then attach a standard SATA data cable and SATA power cable to the 22pin SATA interface before mounting the assembly in the 2.5 inch bay using the board's mounting holes.

Will the adapter or mSATA SSD require any firmware updates or driver maintenance over time?

No driver software is required for operation and the adapter has no firmware, so no ongoing software maintenance is needed; only the mSATA SSD itself may eventually wear out after extensive write cycles.

What is the maximum sustained data transfer speed the SATA II interface on this adapter can support?

The adapter complies with the SATA II specification, which limits sustained throughput to 3 Gbps, so that ceiling will appear before the mSATA SSD's own speed under heavy continuous workloads.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。