我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular E1.S 9.5mm SSD with green circuit board and gold edge connector

Solidigm

Solidigm D7-P5520 7.68TB E1.S 9.5mm PCIe 4.0 enterprise SSD SSDPFUKX076T1OS

SKU CH-8TR7-ZBTHK MPN SSDPFUKX076T1OS

E1.S 9.5mm PCIe 4.0 enterprise SSD delivers 7.68TB capacity with 144L TLC 3D NAND, up to 6600 MBps sequential read, 4200 MBps write, 1100000 IOPS random read, 220000 IOPS random write.

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 6600 MBps
  • Max Sequential WriteUp to 4200 MBps
  • 68TB capacity stores massive datasets
  • Up to 6600 MBps sequential read speeds data access
  • 1100000 random read IOPS accelerates transaction-heavy workloads
  • 0 PBW endurance supports sustained write-intensive operations
  • 2000000 hours MTBF ensures long-term reliability

Enterprise capacity for read-heavy workloads

The Solidigm D7-P5520 delivers 7.68TB of storage in an E1.S 9.5mm form factor built for data-centre servers. It uses 144L TLC 3D NAND with a PCI-Express 4.0 x4 interface to reach 6600 MBps sequential read and 4200 MBps sequential write. Random performance hits 1100000 IOPS read and 220000 IOPS write at 4K blocks. Endurance is rated at 14.0 PBW with a 2000000-hour MTBF.

Hot-plug E1.S tray simplifies installation

The drive slides into a compatible E1.S 9.5mm bay and locks with the built-in latch, so no cables or screws are required. Power draw peaks at 18W active and 5W idle, which standard server backplanes handle without extra cooling. The 72g weight and 1000 G shock rating mean vibration in dense chassis rarely causes issues. Opal encryption is hardware-based and activates through the management console.

Verify E1.S 9.5mm bay and PCIe 4.0 support

Confirm the server chassis has an E1.S 9.5mm slot wired for PCI-Express 4.0 x4; narrower or taller bays will not accept the drive. Check that the backplane supplies up to 18W per slot and that the BIOS or firmware recognises Opal security features. The operating vibration spec of 2.17 GRMS at 5-700 Hz assumes a properly secured tray in a rated enclosure.

商品特色

  • 68TB capacity stores massive datasets
  • Up to 6600 MBps sequential read speeds data access
  • 1100000 random read IOPS accelerates transaction-heavy workloads
  • 0 PBW endurance supports sustained write-intensive operations
  • 2000000 hours MTBF ensures long-term reliability

商品規格

BrandSolidigm
ModelD7-P5520
Part NumberSSDPFUKX076T1OS
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 6600 MBps
Max Sequential WriteUp to 4200 MBps
4KB Random Read1100000 IOPS (4K Blocks)
4KB Random Write220000 IOPS (4K Blocks)
Endurance14.0 PBW
MTBF2,000,000 hours
SecurityOpal
Power Consumption (Idle)5W
Power Consumption (Active)18W
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight72g +/- 5g
出貨重量0.17 kg
包裝尺寸140 × 110 × 17 mm

商品問答

How do I verify the D7-P5520 is performing at its rated 6600 MBps sequential read and 1100000 IOPS random read after installation?

Run a benchmark such as FIO or CrystalDiskMark against the PCIe 4.0 x4 link; expect up to 6600 MBps sequential read and 1100000 IOPS 4K random read if the slot and cooling meet spec

What ships with the SSDPFUKX076T1OS and what must I source separately?

The single pack contains only the 7.68TB E1.S 9.5mm drive; you must supply a compatible E1.S backplane or carrier, PCIe 4.0 cabling, and any mounting screws

Which capacity and form-factor version of the D7-P5520 should I select for a 7.68TB E1.S 9.5mm slot?

Choose part number SSDPFUKX076T1OS; it is the 7.68TB model built in the E1.S 9.5mm form factor for PCIe 4.0 x4 servers

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。