我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Timetec

Timetec 32GB (2x16GB) DDR4 2133MHz CL15 1.2V UDIMM desktop RAM

SKU CH-2HFT-NG5CB

A 32GB dual-channel kit of two 16GB DDR4 UDIMM modules running at 2133MHz with CL15 latency and 1.2V operation

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 32GB (2 x 16GB)

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2133 MHz speed with CL15 latency
  • 2 V operation reduces power draw versus DDR3
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Lifetime warranty backed by US-based technical support

Capacity and Configuration

This Timetec kit supplies 32 GB of DDR4 desktop memory as two 16 GB unbuffered UDIMM modules. It runs at 2133 MHz with CL15 latency at 1.2 V and uses a 288-pin interface for standard desktop DIMM slots.

Upgrade Context

The kit replaces DDR3 modules or lower-capacity DDR4 sticks in systems that accept 288-pin UDIMM memory. The jump is worthwhile when a board supports DDR4 2133 and the user needs 32 GB in two slots for multitasking or memory-intensive workloads.

Suitability and Limits

It suits builders upgrading compatible DDR4 desktops or workstations that require non-ECC unbuffered memory in a dual-channel pair. It does not fit laptops or any system that needs SODIMM modules, registered DIMMs, or ECC functionality.

商品特色

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2133 MHz speed with CL15 latency
  • 2 V operation reduces power draw versus DDR3
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Lifetime warranty backed by US-based technical support

商品規格

BrandTimetec
ModelMM-G16D421U7E
Capacity32GB (2 x 16GB)
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 134 mm height and 288-pin UDIMM layout fit my desktop motherboard slots?

Each module measures 134 mm long and uses the standard 288-pin UDIMM form factor, so it fits any desktop board with DDR4 DIMM slots.

Is there a specific slot order for the two 16 GB sticks, and what is the common mistake?

Install both sticks in the same-coloured slots for dual-channel operation; the common mistake is placing them in adjacent slots instead of the matched pair.

Do these non-ECC unbuffered DIMMs need any firmware updates or periodic reseating over time?

No firmware is required and reseating is not needed unless you move the hardware; the modules are covered by a limited lifetime warranty.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。