Timetec
Timetec 32GB DDR4 3200 CL22 Desktop RAM
32 GB DDR4 desktop module running at 3200 MHz with CL22 timings and 1.2 V operation
- CAS LatencyCL22
- TimingCL22-22-22-52
- Capacity32GB
- SpeedDDR4 3200 (PC4 25600)
Capacity 32GB
- 16GB
- 32GB
被劃上刪除線的選項確實存在,但本站並無供貨。
- 32 GB capacity handles heavy multitasking and large workloads
- 3200 MHz speed with automatic downclock to 2933 MHz or 2666 MHz for broad compatibility
- CL22-22-22-52 timings deliver stable DDR4 performance at 1.2 V
- Dual rank 2Rx8 organisation improves memory throughput on supported platforms
- 288 pin UDIMM form factor fits standard desktop DIMM slots
32GB DDR4 3200 Desktop Module
This is a single 32GB DDR4 UDIMM rated at 3200 MT/s with CL22-22-22-52 timings. It operates at 1.2 V and uses a 288-pin unbuffered non-ECC design. The dual-rank 2Rx8 layout is built on 2048x8 components.
Suits DDR4 desktops needing one high-capacity stick
Buyers upgrading a compatible desktop board with a free slot gain 32 GB in one module. The memory downclocks to 2933 or 2666 when the platform requires it. It is not for laptops, mini PCs or all-in-one devices. Systems that require ECC or registered DIMMs should look elsewhere.
Fits a standard DDR4 desktop build
The module needs a 288-pin DDR4 slot and a platform that accepts non-ECC unbuffered UDIMMs at 1.2 V. No XMP profile is present so the board will apply JEDEC speeds automatically. Using one 32 GB stick leaves remaining slots open for future expansion.
商品特色
- 32 GB capacity handles heavy multitasking and large workloads
- 3200 MHz speed with automatic downclock to 2933 MHz or 2666 MHz for broad compatibility
- CL22-22-22-52 timings deliver stable DDR4 performance at 1.2 V
- Dual rank 2Rx8 organisation improves memory throughput on supported platforms
- 288 pin UDIMM form factor fits standard desktop DIMM slots
商品規格
| CAS Latency | CL22 |
|---|---|
| Timing | CL22-22-22-52 |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
商品問答
What type of motherboard slot is required for this 288-pin DDR4 UDIMM?
This module uses a standard 288-pin DDR4 UDIMM slot. It is designed for desktop motherboards only and will not fit laptop, Mini PC, or all-in-one devices.
Will this CL22 3200MHz module run stably if I keep my existing 2666MHz DDR4 sticks installed?
Yes, the 3200MHz module can downclock to 2933MHz or 2666MHz to match your system specification. Mixing speeds will result in all modules running at the lowest common speed.
How can I confirm the module is operating at the correct 1.2V voltage after installation?
Enter your motherboard BIOS or use a hardware monitoring utility to check the DRAM voltage reading. It should report within the 1.14V to 1.26V range specified for this module.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



