我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
2.5 inch U.2 enterprise SSD with silver metal casing

Western Digital

Western Digital Ultrastar DC SN200 HUSMR7676BDP3Y1 0TS1357 7.68TB enterprise SSD

SKU CH-N5CA-7JV4G

A 7.68 TB enterprise NVMe SSD with 3350 MiB/s reads, 2100 MiB/s writes and 1 DWPD endurance in a 2.5" U.2 form factor

  • Form Factor2.5" U.2
  • Capacity7.68TB
  • InterfacePCI-Express 3.0 x4
  • Sustained Sequential Read3350 MiB/s
  • Sustained Sequential Write2100 MiB/s
  • Endurance1 DWPD
  • 68TB capacity supports large enterprise datasets
  • 3350 MiB/s sequential read accelerates data-intensive workloads
  • 2100 MiB/s sequential write sustains high-throughput operations
  • 1 DWPD endurance rating ensures consistent daily write performance
  • 2,000,000 hours MTBF delivers long-term reliability for data centres

7.68TB enterprise NVMe for data-centre workloads

The Western Digital Ultrastar DC SN200 provides 7.68TB of MLC storage in a 2.5 U.2 form factor. It connects through a PCI-Express 3.0 x4 interface and is rated for 1 DWPD endurance. The drive targets enterprise servers, storage arrays, cloud deployments and big-data analytics where consistent capacity and reliability are required. It is not suited for desktop builds lacking U.2 backplane support.

Sustained 3350 MiB/s read

Sequential throughput is specified at 3350 MiB/s for reads and 2100 MiB/s for writes during continuous operation rather than brief bursts. Dual-port architecture and flash-aware RAID maintain data-path integrity when the drive serves heavy, concurrent I/O streams. End-to-end data protection and advanced ECC correct errors on the fly without throttling performance. The 1 DWPD rating reflects steady-state write durability over the warranty period.

Dual-port U.2 with hot-swap and power-loss

The 2.5 U.2 connector enables dual-port redundancy and hot-swap replacement inside compatible server chassis. Power-loss protection safeguards in-flight writes during unexpected outages. Secure Erase and end-to-end data-path protection simplify decommissioning and compliance. MTBF is rated at 2,000,000 hours for continuous operation. Systems without U.2 NVMe backplanes cannot use this drive.

商品特色

  • 68TB capacity supports large enterprise datasets
  • 3350 MiB/s sequential read accelerates data-intensive workloads
  • 2100 MiB/s sequential write sustains high-throughput operations
  • 1 DWPD endurance rating ensures consistent daily write performance
  • 2,000,000 hours MTBF delivers long-term reliability for data centres

商品規格

BrandWestern Digital
SeriesUltrastar DC SN200
ModelHUSMR7676BDP3Y1
Part Number0TS1357
Form Factor2.5" U.2
Capacity7.68TB
InterfacePCI-Express 3.0 x4
Sustained Sequential Read3350 MiB/s
Sustained Sequential Write2100 MiB/s
Endurance1 DWPD
MTBF2,000,000 hours
FeaturesDual Port, End-to-End Data Path Protection, Advanced ECC, Secure Erase, Power Loss Protection, Flash-Aware RAID, Error Correcting Code, Hot-Swap

商品問答

How much heat and power does the 7.68TB Ultrastar DC SN200 generate when running continuously in a server?

The drive is rated for 1 DWPD endurance with a 2,000,000 hour MTBF, built with MLC flash and power-loss protection for sustained enterprise workloads.

What connector and slot does the U.2 2.5" form factor need on my motherboard or backplane?

It requires a U.2 NVMe port wired to PCIe 3.0 x4; the dual-port design also supports redundant paths in compatible backplanes.

Will this PCIe 3.0 x4 NVMe drive work in an older server that only has PCIe 2.0 slots?

The drive uses PCIe 3.0 x4 for up to 3350 MiB/s read and 2100 MiB/s write; it will negotiate down to PCIe 2.0 speeds if the slot only supports that generation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。