我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 3.5-inch bare hard drive with circuit board visible

Western Digital

Western Digital WD4003FFBX 4TB 7200 RPM 256MB SATA 3.5" internal hard drive

SKU CH-AEHG-TQJ93 MPN WD4003FFBX

4 TB desktop hard drive with 7200 RPM, 256 MB cache and SATA 6.0 Gb/s interface for NAS arrays up to 24 bays

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • NAND Flash Memory TypeHard Drives
  • Recording TechnologyCMR
  • RPM7200 RPM
  • Designed for NAS arrays up to 24 bays with CMR recording technology
  • 300 TB per year workload rating supports heavy multi-user storage demands
  • 7200 RPM spindle speed and 256 MB cache deliver 217 MB/s sustained transfer rate
  • NASware 3.0 firmware and 3D Active Balance Plus reduce vibration and improve error recovery
  • 5 inch form factor with SATA 6.0 Gb/s interface fits standard desktop drive bays

4 TB SATA 6.0 Gb/s desktop drive

The WD Red Pro WD4003FFBX is a 4 TB 3.5-inch internal hard drive built for desktop and NAS use. It runs at 7200 RPM with a 256 MB cache and connects through a SATA 6.0 Gb/s interface. The CMR recording technology and bare-drive packaging suit system builders and integrators.

Suited for multi-bay NAS up to 24 bays

This drive is designed for enterprise NAS environments supporting 1 to 24 drive bays and a 300 TB yearly workload rate. NASware 3.0 firmware and 3D Active Balance Plus improve reliability in vibration-heavy chassis. Not suited for portable use, laptop upgrades, or systems that cannot accommodate a 3.5-inch SATA device.

217 MB/s sustained transfer rate

The supplier rates maximum sustained throughput at 217 MB/s, a figure that helps confirm the drive can keep up with RAID rebuilds and streaming workloads. Combined with the 7200 RPM spindle speed and 256 MB cache, this throughput level is the key indicator for RAID and NAS performance planning.

商品特色

  • Designed for NAS arrays up to 24 bays with CMR recording technology
  • 300 TB per year workload rating supports heavy multi-user storage demands
  • 7200 RPM spindle speed and 256 MB cache deliver 217 MB/s sustained transfer rate
  • NASware 3.0 firmware and 3D Active Balance Plus reduce vibration and improve error recovery
  • 5 inch form factor with SATA 6.0 Gb/s interface fits standard desktop drive bays

商品規格

BrandWD
SeriesRed Pro
ModelWD4003FFBX
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity4TB
NAND Flash Memory TypeHard Drives
Recording TechnologyCMR
RPM7200 RPM
Cache256MB
FeaturesAvailable in large capacities with support for 1-24 bays
Enhanced reliability with 3D Active Balance Plus technology and error recovery controls with NASware 3.0 technology
Extended drive testing to ensure each drive is tested for extended reliable operation
Vibration & Shock protection
UsageEnterprise NAS Hard Drives
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.60mm
Length (maximum)147.00mm
出貨重量0.84 kg
包裝尺寸224 × 160 × 76 mm

商品問答

Do I need a SATA 6.0Gb/s port and 3.5-inch drive bay to install this WD4003FFBX?

Yes — the drive connects via a SATA 6.0Gb/s interface and fits a standard 3.5-inch bay with maximum dimensions of 147.00mm length, 101.60mm width and 26.10mm height.

Will this 7200 RPM CMR drive work in a NAS alongside slower drives using NASware 3.0?

It is built for 1-24 bay NAS systems with NASware 3.0 technology and 3D Active Balance Plus, so it can operate in mixed-drive environments while maintaining its 300TB/year workload rating.

How do I verify the 217 MB/s transfer rate and 256MB cache are active after setup?

Check the drive’s reported cache size and run a sequential read/write benchmark; sustained speeds near 217 MB/s confirm the SATA 6.0Gb/s link and 7200 RPM CMR performance are functioning.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。