我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Zyvpee

Zyvpee 4010L12B NF6 40x40x10mm ball-bearing case fan

SKU CH-ZZPY-0FPSA

40 mm ball-bearing fan runs at 12 V and 0.14 A for compact CPU coolers

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 40 mm frame fits tight CPU coolers
  • Dual ball bearings extend operational lifespan
  • 12 V, 0.14 A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Non-LED black design suits stealth builds

Compact 40 mm CPU cooler fan

The Zyvpee 4010L12B NF6 is a 40 x 40 x 10 mm ball-bearing fan designed for small CPU coolers or tight chassis spaces. It runs on 12 V at 0.14 A and uses a standard 3-pin power connector for direct motherboard or controller attachment.

Suited for low-profile coolers and tight builds

Builders fitting a miniature heatsink, a 1U server tray or any bracket limited to 40 mm will find this fan a direct match. Systems that require higher airflow than a 40 mm frame can deliver should consider a larger form factor.

12 V 0.14 A ball-bearing motor

The dual-ball bearing and 12 V 0.14 A rating determine whether the fan fits the cooler’s power header and expected service life. Verify the cooler’s mounting holes and voltage before ordering.

商品特色

  • Compact 40 mm frame fits tight CPU coolers
  • Dual ball bearings extend operational lifespan
  • 12 V, 0.14 A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Non-LED black design suits stealth builds

商品規格

Series4010L12B NF6
Model4010L12B NF6
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions40*40*10mm

商品問答

Does my motherboard need a 3-pin fan header to run this 4010L12B NF6?

Yes, it connects with a standard 3-pin connector and draws 0.14 A at 12 V, so any 3-pin header that supplies 12 V will power it.

Will this 40 mm ball-bearing fan fit the screw holes on my older 40 mm CPU cooler?

The frame measures 40 by 40 by 10 mm, matching the common 40 mm mounting pattern used on many legacy coolers.

How can I confirm the fan is spinning at the correct speed after I install it?

Check the RPM reading in BIOS or your monitoring software; a steady value that matches the 12 V rating shows the 2-ball bearing motor is running normally.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。