我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 120 by 38 millimetre case fan with three-wire connector

Zyvpee

Zyvpee KD1212PMB3-6A 120x38mm 3.2W 80 CFM 3000-3499 RPM case fan

SKU CH-6PQP-PDKC6

120 mm maglev case fan moving over 80 CFM at 3000–3499 RPM, 3.2 W, 38 mm thick

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • RPM3000-3499 RPM
  • Air Flow>80 CFM
  • Power Connector3 Wires
  • High airflow of over 80 CFM for effective case cooling
  • Maglev bearing reduces friction for quieter operation
  • 3000 to 3499 RPM speed range delivers strong static pressure
  • Low 3.2 W power draw at 12 V keeps energy use minimal
  • 120 mm by 38 mm frame fits standard case mounts

120 × 38 mm Maglev Case Fan

The Zyvpee KD1212PMB3-6A is a 120 mm square frame fan with a 38 mm thick profile designed for standard case mounting. It targets builders who need high static pressure from a maglev bearing in a compact DC 12 V form factor. Buyers who want addressable lighting or PWM speed control should look elsewhere.

Thermals Noise and Power

At 3.2 W the fan draws modest current while spinning between 3000 and 3499 RPM to push more than 80 CFM through restrictive mesh or radiator fins. The maglev bearing keeps acoustic output low for the airflow class and eliminates sleeve-bearing wear. No LED illumination means no extra light bleed in dark chassis.

Three-Wire DC Connector

The unit terminates in a three-wire DC connector so speed is regulated by voltage rather than a PWM signal. This limits automatic curve control on modern motherboards that expect a fourth wire. Verify that your board or fan controller supports voltage-based regulation before purchase.

商品特色

  • High airflow of over 80 CFM for effective case cooling
  • Maglev bearing reduces friction for quieter operation
  • 3000 to 3499 RPM speed range delivers strong static pressure
  • Low 3.2 W power draw at 12 V keeps energy use minimal
  • 120 mm by 38 mm frame fits standard case mounts

商品規格

SeriesKD1212PMB3-6A
ModelKD1212PMB3-6A
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
RPM3000-3499 RPM
Air Flow>80 CFM
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*38mm

商品問答

How do I connect the 3-wire power lead and what polarity mistake should I avoid?

The fan uses a 3-wire DC12V connector; match the yellow wire to +12 V, black to ground and the third wire to the tachometer pin on the motherboard header.

When will the maglev bearing need attention and what does that involve?

The maglev bearing is sealed and maintenance-free; if noise or vibration appears after extended use the entire 120x38mm fan must be replaced.

At what airflow level does the 3000-3499 RPM range hit its thermal limit?

Sustained operation above 80 CFM at the top of the RPM range increases motor temperature until the 3.2 W power budget triggers thermal throttling.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。