OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 4GB DDR3 DIMM running at 1600MHz with CL11 latency and 1.5V operation for desktop upgrades
This A-Tech module is a 4GB DDR3 DIMM rated at 1600MHz with CL11 latency and 1.5V operation. It is built as an unbuffered non-ECC stick using major brand chips and has no heat spreader. The part serves as a direct replacement for several Corsair kits including CML16GX3M4A1600C9B and CMY8GX3M2A1600C9A. It targets desktop owners who need a simple capacity increase.
Before ordering confirm that your motherboard accepts DDR3 DIMMs and has a free 240-pin slot. The module runs at the standard 1.50V DDR3 voltage so no special voltage setting is required. Verify the maximum supported frequency and total capacity allowed by your board and CPU. Mixing this CL11 stick with existing modules of different timings may force the system to run at the slowest common settings.
This 4GB stick replaces the exact Corsair part numbers shown in the compatibility list. The upgrade is worth it when your current installation is below the motherboard limit and you experience slowdowns during multitasking. If your system already runs at the maximum supported memory size adding another module will not increase usable capacity. Choose this module to match the specified 1600MHz speed and CL11 timing of the original kits.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Corsair |
| Model | CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
| Recommend Use | Compatible Replacement for Corsair CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
The package contains a single 4GB DDR3 1600MHz CL11 1.5V DIMM; no additional cables, brackets or documentation are included.
Choose this 4GB DDR3 1600MHz CL11 module when your board has a free 240-pin slot and the manufacturer lists 4GB PC3-12800 unbuffered non-ECC memory as supported.
The module runs at 1600MHz with CL11 latency at 1.5V, providing the standard DDR3 bandwidth your desktop chipset expects for everyday multitasking.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟