نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Chrome 90-degree compression fitting for 16mm hard tube with G1/4 thread

Alphacool

Alphacool Eiszapfen 16mm 90° Compression Fitting G1/4 Chrome

SKU CH-H07M-72BFX

A 16 mm 90° rotatable compression fitting with G1/4 thread for acrylic or brass hard tubing in chrome finish

  • TypeFittings
  • High-flow path from precision-machined 90° bend
  • Secure 16 mm tube grip via angled union-nut corners
  • Chrome coating bonded to resist chipping and peeling
  • Rotatable G1/4 thread aligns with 95 % of components
  • Distinctive Eiszapfen profile with Alphacool logo for easy identification

Precision 90° Rotatable Fitting

The Alphacool Eiszapfen 16mm 90° compression fitting joins 16 mm hard tubing to any component with a G1/4 thread. Its rotatable design simplifies routing in tight custom loops while the chrome finish resists chipping. High-flow internals maintain coolant velocity through the bend.

For 16 mm Hard-Tube Builds

This fitting suits builders assembling rigid acrylic or brass loops who need a right-angle turn with rotational alignment. It is not for systems using soft tubing, different outer-diameter hard tubes or threads other than G1/4.

16 mm Hard-Tube Compatibility

The single specification that decides fit is the 16 mm hard-tube interface paired with a G1/4 thread. Only tubing with exactly that outside diameter will seal correctly in the compression nut.

أبرز المميزات

  • High-flow path from precision-machined 90° bend
  • Secure 16 mm tube grip via angled union-nut corners
  • Chrome coating bonded to resist chipping and peeling
  • Rotatable G1/4 thread aligns with 95 % of components
  • Distinctive Eiszapfen profile with Alphacool logo for easy identification

المواصفات

TypeFittings

أسئلة حول هذا المنتج

Should I pick the 16 mm or a different tube size for this 90° fitting?

This fitting is made for 16 mm outer-diameter acrylic or brass hard tubes; choose it only if your loop uses 16 mm tubing.

What does the 90° bend and rotatable thread do inside a real build?

The 90° angle lets you route tubing around tight corners without kinks, and the rotatable G1/4 base lets you clock the outlet to any orientation after tightening.

The fitting uses a G1/4 thread — what does that cap in practice?

G1/4 is the standard thread on 95% of water-cooling components, so it mates with almost any block, radiator, pump or reservoir port.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.