نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Gold aluminium cube chassis with front USB-C and audio ports

Corn Electronics

Corn Electronics Pixel Cube Gold PC Case

SKU CH-N0WW-V1HBR

Gold aluminium E-ATX mid-tower with two 3.5" bays, one 2.5" bay, 420 mm GPU clearance, 180 mm cooler height, top three 140/120 mm fans, bottom two 140/three 120 mm fans, rear 120 mm fan, front USB-C.

  • TypeE-ATX Mid Tower Chassis
  • Case MaterialAluminum
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays1
  • Max GPU Length420 mm
  • Max CPU Cooler Height180 mm

Options Pixel Cube (Gold)

  • Aluminium chassis keeps heavy E-ATX builds light and rigid
  • 420 mm GPU clearance fits today’s longest graphics cards
  • 180 mm cooler headroom handles tall tower air coolers
  • Top, bottom and rear mounts support up to nine 120 mm or 140 mm fans
  • Front panel adds USB 3.0 Type-C, USB 3.0 and audio jacks

E-ATX mid-tower chassis

The Corn Electronics Pixel Cube Gold is an aluminium E-ATX mid-tower chassis designed for builders who want a compact frame that still accepts full-size components. It supports E-ATX and ATX motherboards and provides room for two 3.5-inch hard drives and one 2.5-inch solid-state drive. Front-panel connectivity includes a USB Type-C port, a USB 3.0 port and an audio jack.

Fan layout and airflow

The case offers flexible fan mounting with space for three 140 or 120 mm fans at the top, two 140 or three 120 mm fans at the bottom and a single 120 mm fan at the rear. This arrangement lets builders tune intake and exhaust paths for quiet operation or higher airflow depending on the hardware installed. Aluminium construction helps dissipate heat from the panel surfaces during normal use.

Sustained-load clearance

Under sustained load the chassis accommodates graphics cards up to 420 mm long and CPU coolers up to 180 mm tall, giving headroom for high-performance parts that run hot over long sessions. The generous GPU and cooler clearances mean thermal throttling is less likely during extended rendering or gaming workloads. Builders who need more than two 3.5-inch bays or additional 2.5-inch slots will need a different enclosure.

أبرز المميزات

  • Aluminium chassis keeps heavy E-ATX builds light and rigid
  • 420 mm GPU clearance fits today’s longest graphics cards
  • 180 mm cooler headroom handles tall tower air coolers
  • Top, bottom and rear mounts support up to nine 120 mm or 140 mm fans
  • Front panel adds USB 3.0 Type-C, USB 3.0 and audio jacks

المواصفات

TypeE-ATX Mid Tower Chassis
Case MaterialAluminum
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Max GPU Length420 mm
Max CPU Cooler Height180 mm

إصدارات أخرى من هذا الطراز

4 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I install the motherboard and which screw pattern should I use?

The chassis supports E-ATX and ATX boards; use the ATX standoff holes for standard ATX, and the extra E-ATX holes only if your board extends to them — mixing the two patterns is the common error.

What drive trays or filters will need replacement later?

Two 3.5-inch HDD bays and one 2.5-inch SSD bay are built in; the removable dust filters on the top, bottom and rear panels are the parts most likely to wear out and need swapping.

At what GPU length does the bottom fan layout become the limiting factor?

A card up to 420 mm fits, but installing a 140 mm bottom fan reduces usable length, so the bottom fan configuration is the first constraint you hit with long GPUs.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.