Geometric Future M5 Vent White ATX Mid Tower PC case
- ATX Mid Tower
- White
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Geometric Future
Mid-tower case with mesh front panel and tempered glass, dual-chamber layout for E-ATX boards, 430 mm GPU clearance, 180 mm CPU cooler height, 160 mm PSU depth.
The Geometric Future M5 Vent is a dual-chamber ATX mid-tower finished in black and yellow. It accepts Extended ATX motherboards and graphics cards up to 430 mm long. CPU coolers up to 180 mm tall and power supplies up to 160 mm deep also fit. The layout separates the motherboard tray from the power supply and drive bays for cleaner cable routing.
A full-height mesh front panel feeds air directly to intake fans and radiators. The top and front mounts each accept 360 mm or 420 mm radiators, while the bottom takes a 360 mm unit and the rear takes 120 mm or 140 mm. This coverage lets builders run custom loops or large AIOs without changing case geometry.
Up to 13 x 120 mm fans can be installed across top, bottom, rear, right-front and motherboard-back positions. The entire chassis uses 0.8–1.2 mm thick steel for rigidity. A built-in display platform on the right-front chamber provides a dedicated spot for small screens or decorative items.
| Brand | Geometric Future |
|---|---|
| Series | M5 Vent |
| Type | ATX Mid Tower |
| Color | Black/Yellow |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm x1 Right Front : 120/140/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad Front : 360mm Rad |
| Max GPU Length | 430mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
It lets you install virtually any modern graphics card, including most triple-fan models, without hitting the front panel or radiator mounts.
The top chamber fits a 360 mm or 420 mm radiator, while the bottom chamber accepts a 360 mm radiator, so you can run two thick AIOs simultaneously.
The case takes Extended ATX boards and power supplies up to 160 mm long, leaving room for cable routing behind the motherboard tray.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟