Geometric Future M5 Vent White ATX Mid Tower PC case
- ATX Mid Tower
- White
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Geometric Future
Dual-chamber mid-tower fits E-ATX boards, 460 mm GPUs and 420 mm radiators with toolless tempered-glass panels
The Geometric Future M5 is a mid-tower case built around a dual-chamber design that separates the motherboard tray from the power supply and drive cages. It accepts Extended ATX boards and graphics cards up to 460 mm long, while the CPU cooler clearance reaches 180 mm. The chassis uses steel between .8 mm and 1.2 mm thick throughout, finished in a black and yellow colour scheme.
Tempered glass side panels attach without screws, and a front-panel USB Type-C port is included for modern peripherals. The internal layout provides a dedicated display platform for small items or accessories. Fan mounts are distributed across every major surface: the top takes three 120 mm or 140 mm fans, the rear one, the right-front position one 120 mm, 140 mm or 160 mm fan, the motherboard back two 120 mm fans, and the bottom three 120 mm or 140 mm fans, totalling up to ten 120 mm equivalents.
Liquid-cooling capacity is defined by the radiator mounts: the top supports 360 mm or 420 mm units, the rear fits 120 mm or 140 mm, and the bottom accepts 360 mm. The power supply bay is limited to units no longer than 160 mm, which excludes many higher-wattage models. Builders needing more than ten fan positions, longer power supplies, or radiators larger than 420 mm will find the M5 unsuitable.
| Brand | Geometric Future |
|---|---|
| Series | M5 |
| Type | ATX Mid Tower |
| Color | Black / Yellow |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm x1 Right Front : 120/140/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad |
| Max GPU Length | 460mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Wipe the glass with a microfibre cloth when dust appears; the toolless latches have no serviceable parts and do not require lubrication.
A 420 mm top radiator handles the highest heat load the case can mount, so GPU length (460 mm) and cooler height (180 mm) become the practical limits before cooling capacity does.
Ten 120 mm fans at full speed move large volume but generate noticeable noise; the 1.2 mm steel panels contain heat, so expect warm exterior surfaces during continuous loads.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟