نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular silver metal chassis with front fan grille and rear power sockets, 400 by 195 by 290 mm

Group Other

Group Other Antminer S19 95TH/s 3250W mining hardware

SKU CH-PDPQ-CSYVR

Bitcoin ASIC miner delivering 95 TH/s at 3250 W with 34.5 J/TH efficiency and integrated APW12 power supply

  • Delivers 95 TH/s hash rate for Bitcoin mining
  • Consumes 3250 W at the wall for high-density deployments
  • Achieves 34.5 J/TH efficiency with Bitmain custom chips
  • Integrated 220 V APW12 power supply simplifies rack installation
  • Compact 400 × 195 × 290 mm chassis fits standard mine shelving

Bitcoin ASIC Miner 95 TH/s

The Bitmain Antminer S19 is a Bitcoin ASIC miner rated at 95 TH/s hash rate with 3250 W power draw. It includes an APW12 power supply and ships new in a single integrated chassis measuring 400 mm by 195 mm by 290 mm. Firmware updates improve start-up speed and operational stability.

Suited for 220 V industrial sites

This unit requires a 220 V supply and draws 3250 W continuously, so it suits facilities with adequate high-voltage capacity and cooling. Buyers without access to 220 V infrastructure or those who cannot sustain the power load should consider other options. The supplier applies a 40 % restock fee within 30 days, making impulse purchases risky.

Efficiency 34.5 J/TH ±10 %

Power efficiency is specified as 34.5 J/TH with a tolerance of ±10 %, and the custom Bitmain chips target an energy ratio as low as 23 J/TH. This figure determines whether the hardware meets your cost-per-hash target.

أبرز المميزات

  • Delivers 95 TH/s hash rate for Bitcoin mining
  • Consumes 3250 W at the wall for high-density deployments
  • Achieves 34.5 J/TH efficiency with Bitmain custom chips
  • Integrated 220 V APW12 power supply simplifies rack installation
  • Compact 400 × 195 × 290 mm chassis fits standard mine shelving

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Will the 95TH/s hash rate and 3250W draw run alongside my older Antminer S17 on the same 220V circuit?

Both miners need 220V input; combined load must stay within your circuit rating. The S19 draws 3250W, so check total amperage before sharing a circuit.

How do I confirm the unit is hashing at the rated 95TH/s after first boot?

The new interface shows real-time hash rate, average hash rate and fluctuations; expect 95TH/s ±3% once firmware stabilises.

Does the box include the APW12 power supply and all cables, or must I buy a 220V PDU separately?

Supplier title states the S19 includes PSU; a 220V PDU or suitable outlet is not in the box and must be sourced separately.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.