暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Group Other

Group Other Antminer S19 95TH/s 3250W mining hardware

SKU CH-PDPQ-CSYVR

Bitcoin ASIC miner delivering 95 TH/s at 3250 W with 34.5 J/TH efficiency and integrated APW12 power supply

  • Delivers 95 TH/s hash rate for Bitcoin mining
  • Consumes 3250 W at the wall for high-density deployments
  • Achieves 34.5 J/TH efficiency with Bitmain custom chips
  • Integrated 220 V APW12 power supply simplifies rack installation
  • Compact 400 × 195 × 290 mm chassis fits standard mine shelving

Bitcoin ASIC Miner 95 TH/s

The Bitmain Antminer S19 is a Bitcoin ASIC miner rated at 95 TH/s hash rate with 3250 W power draw. It includes an APW12 power supply and ships new in a single integrated chassis measuring 400 mm by 195 mm by 290 mm. Firmware updates improve start-up speed and operational stability.

Suited for 220 V industrial sites

This unit requires a 220 V supply and draws 3250 W continuously, so it suits facilities with adequate high-voltage capacity and cooling. Buyers without access to 220 V infrastructure or those who cannot sustain the power load should consider other options. The supplier applies a 40 % restock fee within 30 days, making impulse purchases risky.

Efficiency 34.5 J/TH ±10 %

Power efficiency is specified as 34.5 J/TH with a tolerance of ±10 %, and the custom Bitmain chips target an energy ratio as low as 23 J/TH. This figure determines whether the hardware meets your cost-per-hash target.

特長

  • Delivers 95 TH/s hash rate for Bitcoin mining
  • Consumes 3250 W at the wall for high-density deployments
  • Achieves 34.5 J/TH efficiency with Bitmain custom chips
  • Integrated 220 V APW12 power supply simplifies rack installation
  • Compact 400 × 195 × 290 mm chassis fits standard mine shelving

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 95TH/s hash rate and 3250W draw run alongside my older Antminer S17 on the same 220V circuit?

Both miners need 220V input; combined load must stay within your circuit rating. The S19 draws 3250W, so check total amperage before sharing a circuit.

How do I confirm the unit is hashing at the rated 95TH/s after first boot?

The new interface shows real-time hash rate, average hash rate and fluctuations; expect 95TH/s ±3% once firmware stabilises.

Does the box include the APW12 power supply and all cables, or must I buy a 220V PDU separately?

Supplier title states the S19 includes PSU; a 220V PDU or suitable outlet is not in the box and must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。