نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Gulfe ATX power supply, black metal case, single fan, reduced depth 5.9 inches

Gulfe

Gulfe ATX power supply for HP Pavilion Elite M9295 M9350

SKU CH-D8W6-C74Q7

ATX power supply with reduced depth, 24-pin ATX, 4-pin P4, three SATA and two LP4 connectors, plus over-current and over-power protection

  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for HP Pavilion Elite M9295 and M9350 desktops
  • Reduced depth design at 5.86 inches fits compact cases
  • Dual 12 V rails with over-current and over-power protection
  • 24-pin ATX, 4-pin P4, three SATA, two LP4 and one floppy connectors
  • High-efficiency operation with 115/230 V input and 17 ms hold-up time

Direct Replacement for HP Pavilion Elite M9295

This Gulfe ATX unit is built as a direct replacement for the HP Pavilion Elite M9295TW and M9350F desktop PCs. It matches the original form factor and connector layout required by these specific legacy systems. The power supply delivers the necessary voltage rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V, and +5V-SB. It is suited for owners restoring or repairing these particular HP models.

Straightforward Swap with Standard ATX Connections

Installation follows a standard ATX procedure using the included 24-pin (20+4) main connector, a P4 4-pin CPU connector, three SATA 15-pin connectors, two LP4 4-pin connectors, and one floppy 4-pin connector. The reduced depth of 5.86 inches by 3.3 inches helps it fit the chassis without clearance issues. A common mistake is forcing the keyed 24-pin connector into the motherboard header the wrong way round; align the clip before pressing firmly until it clicks.

Verify Your Exact HP Model and Connector Needs

Before ordering, confirm your desktop is an HP Pavilion Elite M9295TW or M9350F, as other HP models may use different proprietary pinouts or physical dimensions. Check that your motherboard requires a standard 24-pin ATX and a 4-pin P4 CPU power connector, not a proprietary HP connector. Ensure you need the provided mix of three SATA, two LP4, and one floppy power connector for your drives. The unit weighs 2.5 and operates on 115/230 V input.

أبرز المميزات

  • Direct replacement for HP Pavilion Elite M9295 and M9350 desktops
  • Reduced depth design at 5.86 inches fits compact cases
  • Dual 12 V rails with over-current and over-power protection
  • 24-pin ATX, 4-pin P4, three SATA, two LP4 and one floppy connectors
  • High-efficiency operation with 115/230 V input and 17 ms hold-up time

المواصفات

BrandGulfe
TypeATX
Fans1
Weight2.5

أسئلة حول هذا المنتج

How can I verify the Gulfe ATX unit is working correctly after installing it in my HP Pavilion Elite M9295 or M9350?

The system should power on without shutdowns; the single fan must spin and the supply provides +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails with over-current and over-power protection active.

What connectors come attached to this replacement power supply and what extra cables might I need?

It includes a 24-pin ATX (20+4), one 4-pin P4-12V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connector; no additional cables are required if your components use these interfaces.

Which Gulfe ATX version should I choose for the HP Pavilion Elite M9295TW or M9350F desktop?

This single ATX reduced-depth model (5.9" height × 3.4" width, 2.5 kg) replaces the legacy supplies used in both the M9295 and M9350 series, so no other version or capacity option exists.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.