ICY DOCK MB344SP 4 x 2.5" to 5.25" hdd accessory
- Black
- 1 x 5.25" Drive to…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
ICY DOCK
Converts one 5.25" bay to hold one 3.5" drive or two 2.5" SATA drives with tool-less locking and a snap-off dust cover
Model Brackets 3BAY
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The ICY DOCK MB343SP converts a single 5.25 inch half-height bay into space for one 3.5 inch device or two 2.5 inch SATA drives. It accepts 2.5 inch drives between 7.00 and 9.50 millimetres thick. The adapter connects via standard SATA I, II and III interfaces.
The Smart-Tip locking mechanism secures a 3.5 inch drive without screws, while 2.5 inch SSDs slide in tool-free. A snap-off front dust cover keeps the opening clean when drives are absent. Systems without a 5.25 inch external bay cannot use this adapter.
One 5.25 inch bay hosts either a single 3.5 inch hard drive or a pair of 2.5 inch drives simultaneously. The choice of which drive combination to install determines the final storage layout.
| Brand | ICY DOCK |
|---|---|
| Model | MB343SP |
| Color | Black |
| Conversion Tray | 2.5" & 3.5" Drives to 5.25" Bay |
| Mobile Rack Drives Support | 1 x 3.5" device or hard drive or 2 x 2.5" IDE / SATA HDD & SSD (7 - 9.5mm) to 1 x External 5.25" half height device bay |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Multiple Drives |
| Compatible Products | 2.5" & 3.5" |
| Specifications | Drive Fit: 1 x 3.5" device or hard drive 2 x 2.5" IDE / SATA HDD & SSD (7.00 - 9.50mm) Material: Plastic Dimension: 1.63" x 5.85" x 6.69" Weight: 0.25 lb. |
| Package Contents | Device User Manual Screws |
| Features | Compatible with any standard 5.25" device bay Fits 1 x 3.5" device / hard drive & 2 x 2.5" HDD / SSD Durable one piece, lightweight construction Snap-off front panel dust cover Smart-Tip locking mechanism for screwless 3.5" device installation Screw-less installation design for 2.5" HDD / SSD slots Side screw holes for 3.5" hard drive installation Compatible with our 3.5" mobile racks and brackets |
| وزن الشحنة | 0.18 kg |
| أبعاد الطرد | 191 × 157 × 53 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The tray uses SATA I/II/III connectors, so any installed drive runs at up to SATA III 6 Gb/s.
It mounts in one standard 5.25" half-height bay and holds one 3.5" drive or two 2.5" drives between 7.00 mm and 9.50 mm thick.
Slide a 3.5" drive in until the Smart-Tip locks it tool-lessly; for 2.5" drives, use the included screws — skipping the screws is the common mistake.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟