暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black plastic adapter fits one 3.5 inch drive and two 2.5 inch drives in a 5.25 inch bay

ICY DOCK

ICY DOCK MB343SP 2.5" & 3.5" to 5.25" bay adapter hdd accessory

SKU CH-34MJ-712VR MPN MB343SP

Converts one 5.25" bay to hold one 3.5" drive or two 2.5" SATA drives with tool-less locking and a snap-off dust cover

  • ColorBlack
  • Conversion Tray2.5" & 3.5" Drives to 5.25" Bay
  • Mobile Rack Drives Support1 x 3.5" device or hard drive or 2 x 2.5" IDE / SATA HDD & S
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseMultiple Drives
  • Compatible Products2.5" & 3.5"

Model Brackets 3BAY

  • Mount three drives in one 5.25" bay
  • Tool-less locking secures a 3.5" drive
  • Snap-in slots hold two 2.5" SSDs
  • Snap-off front panel blocks dust
  • Lightweight one-piece plastic construction

Flexible Bay Configuration

The ICY DOCK MB343SP converts a single 5.25 inch half-height bay into space for one 3.5 inch device or two 2.5 inch SATA drives. It accepts 2.5 inch drives between 7.00 and 9.50 millimetres thick. The adapter connects via standard SATA I, II and III interfaces.

Tool-Less Installers and Fixed-Bay Builders

The Smart-Tip locking mechanism secures a 3.5 inch drive without screws, while 2.5 inch SSDs slide in tool-free. A snap-off front dust cover keeps the opening clean when drives are absent. Systems without a 5.25 inch external bay cannot use this adapter.

Single 5.25 Inch Bay Occupation

One 5.25 inch bay hosts either a single 3.5 inch hard drive or a pair of 2.5 inch drives simultaneously. The choice of which drive combination to install determines the final storage layout.

特長

  • Mount three drives in one 5.25" bay
  • Tool-less locking secures a 3.5" drive
  • Snap-in slots hold two 2.5" SSDs
  • Snap-off front panel blocks dust
  • Lightweight one-piece plastic construction

仕様

BrandICY DOCK
ModelMB343SP
ColorBlack
Conversion Tray2.5" & 3.5" Drives to 5.25" Bay
Mobile Rack Drives Support1 x 3.5" device or hard drive or 2 x 2.5" IDE / SATA HDD & SSD (7 - 9.5mm) to 1 x External 5.25" half height device bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseMultiple Drives
Compatible Products2.5" & 3.5"
SpecificationsDrive Fit:
1 x 3.5" device or hard drive
2 x 2.5" IDE / SATA HDD & SSD (7.00 - 9.50mm)
Material: Plastic
Dimension: 1.63" x 5.85" x 6.69"
Weight: 0.25 lb.
Package ContentsDevice
User Manual
Screws
FeaturesCompatible with any standard 5.25" device bay
Fits 1 x 3.5" device / hard drive & 2 x 2.5" HDD / SSD
Durable one piece, lightweight construction
Snap-off front panel dust cover
Smart-Tip locking mechanism for screwless 3.5" device installation
Screw-less installation design for 2.5" HDD / SSD slots
Side screw holes for 3.5" hard drive installation
Compatible with our 3.5" mobile racks and brackets
配送重量0.18 kg
梱包サイズ191 × 157 × 53 mm

このモデルの他のバージョン

同シリーズにさらに 4点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What SATA standard does the MB343SP tray support, and what speed does that cap the drives at?

The tray uses SATA I/II/III connectors, so any installed drive runs at up to SATA III 6 Gb/s.

What are the exact bay and drive dimensions the MB343SP fits?

It mounts in one standard 5.25" half-height bay and holds one 3.5" drive or two 2.5" drives between 7.00 mm and 9.50 mm thick.

How do I install drives in the MB343SP, and which step is often missed?

Slide a 3.5" drive in until the Smart-Tip locks it tool-lessly; for 2.5" drives, use the included screws — skipping the screws is the common mistake.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。