Intel SSDSC2BB150G701 DC S3520 enterprise SSD 150GB 2.5" SATA MLC
- 2.5"
- 150GB
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Intel
A 2.5-inch SATA enterprise SSD with 1.6TB capacity, up to 450 MBps read and 380 MBps write speeds, plus 1.0 DWPD endurance
The Intel DC S3520 is a 1.6TB 2.5-inch enterprise SSD built with MLC memory and a SATA III interface. It targets servers and storage arrays that need consistent read performance and power-efficient operation.
Compared with the DC S3510 series, this drive delivers 15% lower idle power, 30% lower active write power and 35% better performance per watt. The jump is worth it when density and efficiency matter more than peak throughput.
The SATA III link caps sequential reads at 450 MBps and writes at 380 MBps, while random performance reaches 67,500 read IOPS and 17,000 write IOPS. Latency sits at 40 µs read and 42 µs write, so workloads needing higher bandwidth or lower latency will require a different interface.
| Brand | Intel |
|---|---|
| Series | DC S3520 |
| Model | SSDSC2BB016T701 |
| Form Factor | 2.5" |
| Capacity | 1.6TB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 450 MBps |
| Max Sequential Write | Up to 380 MBps |
| 4KB Random Read | Up to 67,500 IOPS |
| 4KB Random Write | Up to 17,000 IOPS |
| Read Latency | 40µs |
| Write Latency | 42µs |
| MTBF | 2,000,000 hours |
| Features | Excellent efficiency across power states (compared to DC S3510 Series) - 15% lower idle power - 30% lower active write power - +35% performance/watt (compared to DC S3510 Series) Increased endurance at 1.0 DWPD, suitable for a broad range of applications Low latency Form factors - 2.5" and M.2 (80mm) with increased capacities |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 3.5W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G/0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5-700 Hz) Non-Operating: 3.13 GRMS (5-800 Hz) |
| Height | 7.00mm |
| Weight | 2.33 oz. |
| وزن الشحنة | 0.10 kg |
| أبعاد الطرد | 147 × 107 × 23 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The SSDSC2BB016T701 is a 2.5 inch form factor drive with a 7 mm height, so it fits standard 2.5 inch bays that accept 7 mm drives.
Connect the SATA data cable and the SATA power cable securely; the step often missed is ensuring the SATA data connector clicks fully into the port on both the drive and the motherboard or controller.
At 1.0 DWPD the 1.6TB drive is warrantied for 1.6TB of writes per day; with a 2,000,000 hour MTBF, replacement timing depends on your actual daily write volume.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟