저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Silver 2.5 inch SATA enterprise SSD with black label

Intel

Intel SSDSC2BB016T701 DC S3520 1.6TB 2.5" SATA enterprise SSD

SKU CH-8K2D-DVRH7 MPN SSDSC2BB016T701

A 2.5-inch SATA enterprise SSD with 1.6TB capacity, up to 450 MBps read and 380 MBps write speeds, plus 1.0 DWPD endurance

  • Form Factor2.5"
  • Capacity1.6TB
  • Memory ComponentsMLC
  • InterfaceSATA III
  • Max Sequential ReadUp to 450 MBps
  • Max Sequential WriteUp to 380 MBps

Options 1.6TB

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • 6 TB capacity for large enterprise datasets
  • Up to 450 MB/s sequential read speeds data access
  • Up to 380 MB/s sequential write speeds throughput
  • 67 500 IOPS random read handles heavy workloads
  • 2 million hours MTBF ensures long-term reliability

Capacity and form factor

The Intel DC S3520 is a 1.6TB 2.5-inch enterprise SSD built with MLC memory and a SATA III interface. It targets servers and storage arrays that need consistent read performance and power-efficient operation.

Upgrade from DC S3510

Compared with the DC S3510 series, this drive delivers 15% lower idle power, 30% lower active write power and 35% better performance per watt. The jump is worth it when density and efficiency matter more than peak throughput.

SATA interface limits

The SATA III link caps sequential reads at 450 MBps and writes at 380 MBps, while random performance reaches 67,500 read IOPS and 17,000 write IOPS. Latency sits at 40 µs read and 42 µs write, so workloads needing higher bandwidth or lower latency will require a different interface.

주요 특징

  • 6 TB capacity for large enterprise datasets
  • Up to 450 MB/s sequential read speeds data access
  • Up to 380 MB/s sequential write speeds throughput
  • 67 500 IOPS random read handles heavy workloads
  • 2 million hours MTBF ensures long-term reliability

사양

BrandIntel
SeriesDC S3520
ModelSSDSC2BB016T701
Form Factor2.5"
Capacity1.6TB
Memory ComponentsMLC
InterfaceSATA III
Max Sequential ReadUp to 450 MBps
Max Sequential WriteUp to 380 MBps
4KB Random ReadUp to 67,500 IOPS
4KB Random WriteUp to 17,000 IOPS
Read Latency40µs
Write Latency42µs
MTBF2,000,000 hours
FeaturesExcellent efficiency across power states (compared to DC S3510 Series)
- 15% lower idle power
- 30% lower active write power
- +35% performance/watt (compared to DC S3510 Series)
Increased endurance at 1.0 DWPD, suitable for a broad range of applications
Low latency
Form factors - 2.5" and M.2 (80mm) with increased capacities
Power Consumption (Idle)0.6W
Power Consumption (Active)3.5W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1000G/0.5ms
Max Vibration ResistanceOperating: 2.17 GRMS (5-700 Hz)
Non-Operating: 3.13 GRMS (5-800 Hz)
Height7.00mm
Weight2.33 oz.
배송 무게0.10 kg
포장 크기147 × 107 × 23 mm

이 모델의 다른 버전

같은 라인업에서 2개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does the 2.5 inch 7 mm SSDSC2BB016T701 fit in a standard 2.5 inch drive bay?

The SSDSC2BB016T701 is a 2.5 inch form factor drive with a 7 mm height, so it fits standard 2.5 inch bays that accept 7 mm drives.

What is the correct way to install the Intel DC S3520 SATA III SSD and what step is often missed?

Connect the SATA data cable and the SATA power cable securely; the step often missed is ensuring the SATA data connector clicks fully into the port on both the drive and the motherboard or controller.

When will the 1.6TB MLC drive with 1.0 DWPD rating need replacement under typical write workloads?

At 1.0 DWPD the 1.6TB drive is warrantied for 1.6TB of writes per day; with a 2,000,000 hour MTBF, replacement timing depends on your actual daily write volume.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.