暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SATA enterprise SSD with black label

Intel

Intel SSDSC2BB016T701 DC S3520 1.6TB 2.5" SATA enterprise SSD

SKU CH-8K2D-DVRH7 MPN SSDSC2BB016T701

A 2.5-inch SATA enterprise SSD with 1.6TB capacity, up to 450 MBps read and 380 MBps write speeds, plus 1.0 DWPD endurance

  • Form Factor2.5"
  • Capacity1.6TB
  • Memory ComponentsMLC
  • InterfaceSATA III
  • Max Sequential ReadUp to 450 MBps
  • Max Sequential WriteUp to 380 MBps

Options 1.6TB

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • 6 TB capacity for large enterprise datasets
  • Up to 450 MB/s sequential read speeds data access
  • Up to 380 MB/s sequential write speeds throughput
  • 67 500 IOPS random read handles heavy workloads
  • 2 million hours MTBF ensures long-term reliability

Capacity and form factor

The Intel DC S3520 is a 1.6TB 2.5-inch enterprise SSD built with MLC memory and a SATA III interface. It targets servers and storage arrays that need consistent read performance and power-efficient operation.

Upgrade from DC S3510

Compared with the DC S3510 series, this drive delivers 15% lower idle power, 30% lower active write power and 35% better performance per watt. The jump is worth it when density and efficiency matter more than peak throughput.

SATA interface limits

The SATA III link caps sequential reads at 450 MBps and writes at 380 MBps, while random performance reaches 67,500 read IOPS and 17,000 write IOPS. Latency sits at 40 µs read and 42 µs write, so workloads needing higher bandwidth or lower latency will require a different interface.

特長

  • 6 TB capacity for large enterprise datasets
  • Up to 450 MB/s sequential read speeds data access
  • Up to 380 MB/s sequential write speeds throughput
  • 67 500 IOPS random read handles heavy workloads
  • 2 million hours MTBF ensures long-term reliability

仕様

BrandIntel
SeriesDC S3520
ModelSSDSC2BB016T701
Form Factor2.5"
Capacity1.6TB
Memory ComponentsMLC
InterfaceSATA III
Max Sequential ReadUp to 450 MBps
Max Sequential WriteUp to 380 MBps
4KB Random ReadUp to 67,500 IOPS
4KB Random WriteUp to 17,000 IOPS
Read Latency40µs
Write Latency42µs
MTBF2,000,000 hours
FeaturesExcellent efficiency across power states (compared to DC S3510 Series)
- 15% lower idle power
- 30% lower active write power
- +35% performance/watt (compared to DC S3510 Series)
Increased endurance at 1.0 DWPD, suitable for a broad range of applications
Low latency
Form factors - 2.5" and M.2 (80mm) with increased capacities
Power Consumption (Idle)0.6W
Power Consumption (Active)3.5W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1000G/0.5ms
Max Vibration ResistanceOperating: 2.17 GRMS (5-700 Hz)
Non-Operating: 3.13 GRMS (5-800 Hz)
Height7.00mm
Weight2.33 oz.
配送重量0.10 kg
梱包サイズ147 × 107 × 23 mm

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 2.5 inch 7 mm SSDSC2BB016T701 fit in a standard 2.5 inch drive bay?

The SSDSC2BB016T701 is a 2.5 inch form factor drive with a 7 mm height, so it fits standard 2.5 inch bays that accept 7 mm drives.

What is the correct way to install the Intel DC S3520 SATA III SSD and what step is often missed?

Connect the SATA data cable and the SATA power cable securely; the step often missed is ensuring the SATA data connector clicks fully into the port on both the drive and the motherboard or controller.

When will the 1.6TB MLC drive with 1.0 DWPD rating need replacement under typical write workloads?

At 1.0 DWPD the 1.6TB drive is warrantied for 1.6TB of writes per day; with a 2,000,000 hour MTBF, replacement timing depends on your actual daily write volume.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。