Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black
- 3 Fans
- Case Fan
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Jungle Leopard
Three 120 mm hydraulic-bearing fans with reverse blades, 5 V ARGB daisy-chain lighting and PWM speed control from 800 to 2000 RPM
Color Black Reverse
The Jungle Leopard Galaxy set delivers three 120 mm case fans with a reverse-blade layout, hydraulic bearings and addressable RGB lighting. Each unit spins between 800 and 2000 RPM, pushing 62.36 CFM at 2.21 mmAq while staying at 29 dBA. A 4-pin PWM connector handles speed control and a 5 V 3-pin ARGB header synchronises lighting across major motherboard platforms. The black finish measures 120×120×25 mm (4.72×4.72×0.98 in).
A slide-in pin-to-pin interlock lets the three fans connect in series so only one cable runs back to the motherboard for both power and lighting. This replaces the usual tangle of individual fan and RGB cables, cutting routing time and leaving the chassis interior cleaner. The jump is worth it when building in a compact case or when several fans share a single RGB header and PWM channel.
The fans require a 5 V 3-pin ARGB header and a 4-pin PWM header on the motherboard; older 12 V 4-pin RGB or 3-pin voltage-controlled headers will not drive the lighting or speed curves. Total current draw of the daisy-chained cluster must stay within the header’s rated limit, otherwise lighting may flicker or fans may not reach 2000 RPM. No controller box is included, so boards without spare 5 V ARGB and PWM headers cannot use the synchronisation features.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Each fan measures 120×120×25 mm, the common 120 mm mounting pattern, so they fit any case designed for 120 mm fans.
Slide the fans together using the pin-to-pin interlock, run one combined ARGB lead to a 5 V 3-pin header and one PWM lead to a 4-pin header on the motherboard.
Hydraulic bearings typically last several years at 29 dBA; listen for rising noise or rpm drop below the 800–2000 rpm range as a sign to swap the fan.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟