OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
1GB DDR 333 desktop memory module rated at PC 2700 with CL2.5 latency and 2.50V operation
This Kingston ValueRAM module provides 1GB of DDR 333 memory rated at PC 2700. It targets budget-conscious system builders and assemblers who need standard-compliant desktop RAM for older platforms. The stick operates at 2.50V with a CAS latency of CL2.5 and ships without a heat spreader. It suits basic office or legacy repair work where capacity needs are modest.
ValueRAM follows JEDEC 'by spec' timings so there are no enhanced profiles, overclocking headroom or bundled software utilities. The CL2.5 latency and 2.50V voltage are fixed at the rated 333 MHz speed. Builders receive exactly the rated density and frequency without extra accessories or tuning options. This keeps the component predictable for white-box integration.
The DDR 333 (PC 2700) interface caps bandwidth at the rated 2700 MB/s theoretical maximum. Latency is bound by the CL2.5 timing at 2.50V with no ECC error correction available. Systems requiring higher throughput, lower latency or error-checking must use a different memory standard. This module cannot exceed its specified transfer rate or voltage.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR333/1GR |
| Capacity | 1GB |
| Speed | DDR 333 (PC 2700) |
| CAS Latency | CL2.5 |
| Voltage | 2.50V |
| ECC | No |
| Heat Spreader | No |
| وزن الشحنة | 0.01 kg |
| أبعاد الطرد | 184 × 133 × 19 mm |
The module ships without a heat spreader and runs at the standard 2.5 V, so no extra cooling is required under normal desktop loads.
The fixed CAS latency of CL2.5 sets the timing ceiling; bandwidth cannot exceed the DDR 333 spec during sustained use.
At 2.5 V the module draws only the power defined by the DDR 333 standard, generating minimal heat without a spreader.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟