نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular bench power supply unit with dual digital displays and front panel controls

myVolts

myVolts STP6005D DC power supply 0-60V 0-5A factory maintenance

SKU CH-5D4F-48JAJ MPN STP6005D

Adjustable 0-60 V, 0-5 A DC supply with dual display, CV/CC auto-switching and short-circuit, over-temperature protection for bench and cabinet use

  • TypeAT
  • Continuous 0-60V and 0-5A adjustment for flexible bench testing
  • Automatic CV/CC crossover keeps output stable when load conditions change
  • Dual independent displays show voltage and current at a glance
  • Built-in current-limiting, short-circuit and over-temperature protection guards connected gear
  • Up to 80% efficiency reduces waste heat during extended maintenance sessions

Adjustable DC output 0-60 V 0-5 A

The myVolts STP6005D is a bench-top DC power supply that delivers continuously adjustable voltage from 0 to 60 V and current from 0 to 5 A. It operates in constant-voltage or constant-current mode with automatic crossover, and the dual display shows both values independently. Efficiency reaches 80 %. It is built for factory maintenance, calibration stations and integration into test cabinets.

Engineers and technicians needing precise

This unit suits engineers and technicians who require a regulated DC source for prototyping, repair or calibration work where fine voltage and current control matter. The 0.5 % + 3 mV line regulation and 50 mVrms ripple support sensitive analogue circuits. Buyers who need higher current, higher voltage, programmable sequencing or remote computer control should look at other equipment.

60 V maximum output voltage

The single specification that decides fit is the 60 V maximum output voltage combined with a 5 A current limit. If the device under test requires more than 60 V or more than 5 A, this supply cannot power it.

أبرز المميزات

  • Continuous 0-60V and 0-5A adjustment for flexible bench testing
  • Automatic CV/CC crossover keeps output stable when load conditions change
  • Dual independent displays show voltage and current at a glance
  • Built-in current-limiting, short-circuit and over-temperature protection guards connected gear
  • Up to 80% efficiency reduces waste heat during extended maintenance sessions

المواصفات

TypeAT

أسئلة حول هذا المنتج

At what output current does the load-regulation spec change from 0.1% + 3mV to 0.2% + 5mV?

The load-regulation specification shifts at 3 A; below that it is 0.1% + 3mV, above it becomes 0.2% + 5mV.

What protection features activate during continuous full-load operation to manage heat and faults?

Over-temperature protection, short-circuit protection and current-limiting buck circuitry engage automatically during sustained use.

Which mains fuse must be present in the IEC inlet before the unit will power on?

A 5 A, 250 VAC slow-blow fuse (marked F5AL) is required in the inlet for the supply to operate.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.