EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
128GB DDR4 3200 ECC load-reduced DIMM for servers and workstations, CL22 latency at 1.2V with 4Rx4 rank and 288-pin fit
This 128GB DDR4 3200 CL22 4Rx4 288-pin 1.2V ECC Load Reduced DIMM is built for servers, workstations and NAS systems that require registered ECC memory. It delivers 128GB per module at PC4-25600 speed with JEDEC-standard timings and voltage. The module is designed as a direct replacement for Cisco UCS part numbers UCSML128G4RW and UCSXML128G4RW.
The module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz DDR4 platforms, allowing a straight swap without BIOS changes. The upgrade is worth it when your workload needs the higher 3200MHz data rate or the full 128GB density per slot to reduce the total module count. It will not work in systems that only accept unbuffered or standard registered ECC DIMMs.
Installation requires a motherboard with 288-pin DDR4 slots that support Load Reduced ECC memory and 4Rx4 organisation. The module has no heat spreader, so airflow in the chassis must be sufficient for bare DRAM. It cannot be mixed with unbuffered or registered ECC modules, freeing you from matching dissimilar memory types in the same channel.
| Brand | OWC |
|---|---|
| Part Number | 3L2D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
Yes, the 288-pin DDR4 LRDIMM form factor matches standard server DIMM slots; verify your platform accepts load-reduced memory before installing.
Align the notch with the slot key, press firmly until both retention clips click, and confirm the module sits evenly; the step often missed is not pressing both ends simultaneously.
No firmware updates are needed for the memory itself; the module is designed for the server's lifespan, though system BIOS updates may improve compatibility with 3200MHz operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟