Solidigm D7-P5520 3.84TB E1.S 9.5mm PCIe 4.0 enterprise SSD SSDPFUKX038T1N1
- E1.S 9.5mm
- 3.84TB
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Solidigm
Enterprise U.2 15mm SSD with 7.68TB of 144L TLC 3D NAND, PCIe 4.0 x4, 7100 MBps read, 4200 MBps write, 2,000,000-hour MTBF
Options 7.68TB, U.2 15mm, Non-OPAL
The Solidigm D7-P5520 is a 7.68TB enterprise SSD built for 2.5-inch U.2 bays with a 15mm z-height. It connects through a PCIe 4.0 x4 interface and uses 144L TLC 3D NAND. Sequential reads reach up to 7100 MBps and writes up to 4200 MBps. The drive carries a 2,000,000-hour MTBF rating and is rated for 1,000 G shock at 0.5 msec.
This drive suits data-centre nodes that need high-capacity, read-optimised storage in a standard 15mm U.2 slot. It also supports health reporting over PCIe and SMBus without interrupting I/O, plus concurrent TRIM and expanded LBA formats for metadata handling. Builders whose chassis only accept 7mm U.2 or M.2 form factors cannot use this 15mm module.
The single specification that determines fitment is the 15mm U.2 form factor. Verify that the server or storage array explicitly supports 15mm 2.5-inch U.2 drives before ordering.
| Brand | Solidigm |
|---|---|
| Series | D7-P5520 |
| Model | D7-P5520 |
| Form Factor | U.2 15mm |
| Capacity | 7.68TB |
| Memory Components | 144L TLC 3D NAND |
| Interface | PCI-Express 4.0 |
| Max Sequential Read | Up to 7100 MBps |
| Max Sequential Write | Up to 4200 MBps |
| MTBF | 2,000,000 hours |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| وزن الشحنة | 0.45 kg |
| أبعاد الطرد | 203 × 152 × 127 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Sequential write is rated up to 4200 MBps; sustained use will stay within that limit and the drive's thermal design for U.2 15mm bays.
The PCIe 4.0 x4 interface and 144L TLC NAND are built for data-centre thermal envelopes; typical steady-state power fits standard 2.5-inch U.2 cooling.
It needs a U.2 backplane wired for PCI-Express 4.0 x4; the 15mm height also requires a bay that accepts 15mm drives.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟