OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
STARTECH
Adds a DB25 parallel port and a DB9 RS232 serial port through a PCI Express x1 2.0 slot
The PEX1S1P950 adds one DB25 parallel port and one DB9 serial port to a desktop through a single PCI Express x1 2.0 slot. It targets technicians and industrial users who still drive printers, scanners, plotters or RS232 equipment that lack USB or native motherboard headers.
The card uses a full-height bracket so it fits typical tower chassis without a low-profile swap. Both DB25 and DB9 ports are mounted directly on the bracket, giving secure screw-down connections that resist vibration in rack or bench environments. The Asix AX99100 controller handles the parallel interface while a 16C950 UART drives the serial side.
This model supersedes the earlier 952 card, raising the DB25 maximum to 2.5 Mbps and keeping the DB9 at 921.6 Kbps. The upgrade is worthwhile when legacy software demands ECP or EPP parallel modes under IEEE 1284, or when a 16C950-compatible UART is required for timing-sensitive serial gear. It is not suited for builds that need more than one legacy port of each type.
| Brand | StarTech.com |
|---|---|
| Model | PEX1S1P950 |
| Type | PCIe Card with Serial and Parallel Port |
| External Ports | DB-25 (25 pin, D-Sub) DB-9 (9 pin, D-Sub) |
| Standard | PCI Express x1 |
| Features | PCIe Card with Serial and Parallel Port Add a DB25 parallel and a DB9 RS232 serial port using a PCIe x1 2.0 full profile PCIe card slots Upgraded version of popular card PEX1S1P952 DB25 Speeds up to 2.5Mbps SPP/Byte/ECP modes IEEE 1284 Asix AX99100 DB9 Speeds up to 921.6Kbps 16C950 UART Use PCI Express expansion combo card w/printer/scanner/plotter PCI-e Base Spec Rev 1.1 PCI Power Mgmt 1.2 Adapter card supports Windows 7+/Server 2003+/Linux 2.6.X+ |
| وزن الشحنة | 0.14 kg |
| أبعاد الطرد | 170 × 142 × 30 mm |
The card plugs into a PCI Express x1 2.0 slot and follows the PCI-e Base Spec Rev 1.1, giving 2.5 Gbps per lane.
It needs one full-profile PCIe x1 2.0 slot and fits a standard DB-25 and DB-9 bracket cut-out.
Power off the PC, insert the card into a free PCIe x1 slot, secure the bracket screw, then install the Windows 7+, Server 2003+ or Linux 2.6+ drivers before connecting legacy devices.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟