نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Three white 120mm square case fans with ARGB lighting and transparent blades, shown with controller and remote

Vetroo

Vetroo ICE BLADE ARGB120 WT 3 Pack 120mm White Case Fans

SKU CH-4R0C-RTBH7

Three white 120 mm case fans with ARGB lighting, PWM control and a supplied controller deliver up to 48.1 CFM airflow at 26 dBA

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM<1600 RPM

Color White

Number 3-Pack w/ Controller

  • 1-Pack
  • 3-Pack w/ Controller

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • ARGB sync via 5V 3-pin header for unified lighting
  • PWM auto-adjusts 800-1300 RPM to chassis temperature
  • 8 rubber pads plus hydraulic bearing cut noise to 20-25 dBA
  • Included controller and remote manage RGB effects and fan speed
  • 9-blade design pushes 35-40 CFM for strong case airflow

Three-fan ARGB cooling kit

The Vetroo ICE BLADE ARGB120 WT pack delivers three 120 mm white-frame fans with addressable RGB lighting and a bundled controller. Each unit spins up to 1600 RPM and moves between 35 and 40 CFM while producing 20 to 25 dBA. A 5 V 3-pin header syncs colours with compatible motherboards, and PWM adjusts speed automatically.

Builders wanting coordinated lighting

The included controller and remote let you set effects or fan curves without software, ideal for first-time builders or clean white-themed builds. Buyers who need higher static pressure for dense radiators or prefer a single premium fan with longer rated life should look elsewhere.

Steady airflow under continuous load

Hydro bearings and eight rubber pads keep vibration low during extended sessions, while the PWM curve holds speeds between 800 and 1300 RPM as chassis temperature rises. Rated output reaches 48.1 CFM at 26 dBA, and the 12 V 0.35 A draw stays consistent over long gaming or rendering periods.

أبرز المميزات

  • ARGB sync via 5V 3-pin header for unified lighting
  • PWM auto-adjusts 800-1300 RPM to chassis temperature
  • 8 rubber pads plus hydraulic bearing cut noise to 20-25 dBA
  • Included controller and remote manage RGB effects and fan speed
  • 9-blade design pushes 35-40 CFM for strong case airflow

المواصفات

BrandVetroo
SeriesICE BLADE
ModelARGB120 WT
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM<1600 RPM
Air Flow35-40 CFM
Noise Level20 - 25 dBA
Power Connector3 / 4 Pin
ColorWhite
LEDARGB
Dimensions120 * 25* 120 mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does my motherboard need a 5V 3-pin ARGB header to synchronise the lighting on these fans?

Yes, the ARGB LEDs sync through a 5V 3-pin motherboard header; the included controller and remote can also drive the lighting if your board lacks that header.

Will the bundled PWM controller let me run these fans on a motherboard that only has 3-pin voltage-controlled headers?

Yes, the fans use a 3/4-pin connector and the supplied controller handles PWM speed curves, so they work with older 3-pin headers while still offering automatic 800-1300 RPM adjustment.

After installing the fans, how can I confirm they are spinning within the intended 800-1300 RPM range?

Check the fan speed readout in your BIOS or monitoring software; at typical loads the fans should report between 800 and 1300 RPM, matching the PWM curve.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.