Vetroo
Vetroo ICE BLADE ARGB120 WT 3 Pack 120mm White Case Fans
Three white 120 mm case fans with ARGB lighting, PWM control and a supplied controller deliver up to 48.1 CFM airflow at 26 dBA
- Fan Counts3 Fans
- TypeCase Fan
- CompatibilityCase
- Fan Thickness25mm
- Bearing TypeHydro Bearing
- RPM<1600 RPM
Number 3-Pack w/ Controller
- 1-Pack
- 3-Pack w/ Controller
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
- ARGB sync via 5V 3-pin header for unified lighting
- PWM auto-adjusts 800-1300 RPM to chassis temperature
- 8 rubber pads plus hydraulic bearing cut noise to 20-25 dBA
- Included controller and remote manage RGB effects and fan speed
- 9-blade design pushes 35-40 CFM for strong case airflow
Three-fan ARGB cooling kit
The Vetroo ICE BLADE ARGB120 WT pack delivers three 120 mm white-frame fans with addressable RGB lighting and a bundled controller. Each unit spins up to 1600 RPM and moves between 35 and 40 CFM while producing 20 to 25 dBA. A 5 V 3-pin header syncs colours with compatible motherboards, and PWM adjusts speed automatically.
Builders wanting coordinated lighting
The included controller and remote let you set effects or fan curves without software, ideal for first-time builders or clean white-themed builds. Buyers who need higher static pressure for dense radiators or prefer a single premium fan with longer rated life should look elsewhere.
Steady airflow under continuous load
Hydro bearings and eight rubber pads keep vibration low during extended sessions, while the PWM curve holds speeds between 800 and 1300 RPM as chassis temperature rises. Rated output reaches 48.1 CFM at 26 dBA, and the 12 V 0.35 A draw stays consistent over long gaming or rendering periods.
주요 특징
- ARGB sync via 5V 3-pin header for unified lighting
- PWM auto-adjusts 800-1300 RPM to chassis temperature
- 8 rubber pads plus hydraulic bearing cut noise to 20-25 dBA
- Included controller and remote manage RGB effects and fan speed
- 9-blade design pushes 35-40 CFM for strong case airflow
사양
| Brand | Vetroo |
|---|---|
| Series | ICE BLADE |
| Model | ARGB120 WT |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 35-40 CFM |
| Noise Level | 20 - 25 dBA |
| Power Connector | 3 / 4 Pin |
| Color | White |
| LED | ARGB |
| Dimensions | 120 * 25* 120 mm |
이 모델의 다른 버전
같은 라인업에서 5개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Vetroo Sakura ARGB120 PK 3-pack 120mm pink ARGB PWM case fans
- 3 Fans
- Case Fan
Vetroo ICE BLADE ARGB120 WT 3-pack 120mm ARGB PWM case fans
- 3 Fans
- Case Fan
이 상품에 대한 질문
Does my motherboard need a 5V 3-pin ARGB header to synchronise the lighting on these fans?
Yes, the ARGB LEDs sync through a 5V 3-pin motherboard header; the included controller and remote can also drive the lighting if your board lacks that header.
Will the bundled PWM controller let me run these fans on a motherboard that only has 3-pin voltage-controlled headers?
Yes, the fans use a 3/4-pin connector and the supplied controller handles PWM speed curves, so they work with older 3-pin headers while still offering automatic 800-1300 RPM adjustment.
After installing the fans, how can I confirm they are spinning within the intended 800-1300 RPM range?
Check the fan speed readout in your BIOS or monitoring software; at typical loads the fans should report between 800 and 1300 RPM, matching the PWM curve.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear








