A-Tech
A-Tech 64GB DDR5 4800 ECC RDIMM 2Rx4 for Dell SNPJ52K5C/64G AC239379 Server Memory
64 GB DDR5 4800 ECC registered server DIMM with CL40 latency and 1.1 V operation
- Capacity64GB
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- Buffered/RegisteredRegistered
- 64 GB capacity supports heavy server workloads
- DDR5 4800 MHz speed enables fast data throughput
- ECC RDIMM with 2Rx4 rank provides error correction and signal integrity
- 1 V standard voltage ensures efficient power use
- 288-pin DIMM form factor fits compatible Dell server slots
Server Memory Upgrade
The A-Tech 64GB DDR5 4800 ECC RDIMM module is designed as a compatible replacement for Dell part numbers SNPJ52K5C/64G and AC239379. It targets administrators upgrading server or workstation platforms that require registered error-correcting memory. The single 64GB stick uses a 288-pin DIMM form factor and operates at the standard DDR5 voltage of 1.10V.
Thermals and Power Draw
Running at 4800 MT/s with a CAS latency of CL40, the module draws 1.10V in line with the DDR5 baseline. Registered buffering reduces electrical load on the memory controller, helping maintain stable thermals inside densely populated chassis. No active cooling is present on the module itself, so airflow across the DIMM slots handles heat dissipation during normal operation.
Sustained Load Behaviour
Under continuous workloads, the registered design and on-die ECC maintain data integrity while the major-brand chipset sustains rated frequency. The 2Rx4 organization (EC8) distributes access across ranks to support consistent throughput. Buyers needing capacities beyond a single 64GB module or systems requiring unbuffered DIMMs should verify platform specifications before ordering.
Puntos fuertes
- 64 GB capacity supports heavy server workloads
- DDR5 4800 MHz speed enables fast data throughput
- ECC RDIMM with 2Rx4 rank provides error correction and signal integrity
- 1 V standard voltage ensures efficient power use
- 288-pin DIMM form factor fits compatible Dell server slots
Especificaciones
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Dell |
| Model | SNPJ52K5C/64G, AC239379 |
| Capacity | 64GB |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 (EC8) |
| Chipset | Major Brand Chipset |
| Features | SNPJ52K5C/64G, AC239379 |
Preguntas sobre este artículo
How do I install this 288-pin DDR5 RDIMM in my Dell server, and what step is often missed?
Power down and unplug the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both ejector tabs click locked, then power on and verify 64GB appears in BIOS or system firmware — the step often missed is confirming the module is fully seated by the audible click of both tabs.
What maintenance or replacement will this ECC RDIMM need over its service life?
No scheduled maintenance is required for the module itself; keep server air intakes clean so the 1.10V DDR5 memory stays within thermal limits, and replace only if system logs report correctable ECC errors rising or a DIMM fails POST — the registered design and major-brand chipset are built for continuous server operation.
What limit appears first when this 4800MHz CL40 module runs sustained workloads?
The DDR5 4800 MT/s data rate and CL40 latency set the bandwidth and response ceiling; under sustained load the memory controller will hit its maximum throughput before the 1.10V RDIMM reaches any thermal or voltage limit, so total throughput caps at the rated PC5-38400 speed.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.



