EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
8GB DDR4 2133MHz CL15 desktop module replaces Samsung M378A1K43BB1-CPBD0 with 1.2V unbuffered operation
This 8GB DDR4 module runs at 2133MHz with CL15 latency and 1.2V operation. It is built as a compatible replacement for the Samsung M378A1K43BB1-CPBD0 part number. The unbuffered, non-ECC DIMM targets desktop users who need a direct swap for that specific Samsung stick.
The stick uses a standard 288-pin DDR4 DIMM layout, noted as 262-pin in the supplier data, and carries Samsung chipset components. No heat spreader is fitted, keeping the profile low for tight slots. Every unit passes A-Tech quality assurance testing before it ships.
Installation follows the usual desktop DIMM procedure: align the notch, press until the latches click, and verify the system POSTs at 2133MHz. The most frequent issue is a motherboard that defaults to a lower speed or fails to train when the slot population changes. Checking the manual for supported frequencies and seating the module firmly resolves most problems.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M378A1K43BB1-CPBD0 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Samsung Chipset |
| Heat Spreader | No |
| Features | M378A1K43BB1-CPBD0 |
| Recommend Use | Compatible Replacement for Samsung M378A1K43BB1-CPBD0 |
No heat spreader is fitted and the 1.20V DDR4 design runs within JEDEC thermal limits, so no aftermarket cooling is required.
The 2133 MT/s data rate is the hard ceiling; CL15 only adds a few nanoseconds per access and does not limit peak bandwidth.
At 1.20V the module typically draws 2–3 watts, producing minimal heat and negligible fan noise inside a desktop chassis.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?