Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión

HPE

HPE ProLiant DL380 Gen9 4LFF rack server 2x Xeon E5-2650L v3 1.8GHz 12-core 256GB DDR4

SKU CH-0AFQ-TT6VD

A dual-processor 2U rack server with 24 cores at 1.8 GHz, 256 GB DDR4 ECC memory and four 3.5-inch drive bays ready for SAS or SATA storage

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed1.8GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual 12-core Xeon processors at 1.8GHz deliver high parallel throughput
  • 256GB DDR4 ECC registered memory supports large virtualised workloads
  • HPE Smart Array P440 SAS controller enables flexible RAID arrays
  • HPE iLO Advanced provides comprehensive remote server management
  • 4LFF chassis accepts up to four 3.5-inch SATA drives

Server chassis and processors

The HPE ProLiant DL380 Gen9 4LFF rack server ships with two Xeon E5-2650L v3 processors running at 1.8GHz, each providing 12 cores for a total of 24 threads. It targets organisations that need a dense 2U platform for virtualization, database or legacy workloads where high core counts and large memory capacity matter more than single-thread speed.

Thermals and power in normal use

Dual 500W Flex Slot power supplies deliver redundant power while the chassis fans adjust speed based on inlet temperature and component load. Under typical mixed workloads the system maintains safe thermal margins without reaching maximum fan RPM, keeping acoustic output suitable for a standard server room environment.

Included controller and management

The onboard P440 SAS controller supports RAID 0, 1, 5, 6, 10, 50 and 60 across up to four 3.5-inch SATA drive bays, and the integrated iLO Advanced remote management enables full out-of-band control, firmware updates and health monitoring without an operating system.

Puntos fuertes

  • Dual 12-core Xeon processors at 1.8GHz deliver high parallel throughput
  • 256GB DDR4 ECC registered memory supports large virtualised workloads
  • HPE Smart Array P440 SAS controller enables flexible RAID arrays
  • HPE iLO Advanced provides comprehensive remote server management
  • 4LFF chassis accepts up to four 3.5-inch SATA drives

Especificaciones

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed1.8GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)16,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Preguntas sobre este artículo

How do I install the 3.5 inch drives into the four LFF bays and what step is often missed?

Slide each drive into a bay until the latch clicks, then verify the P440 SAS controller detects every drive in the BIOS before creating arrays.

Which components will need replacement first during long-term operation?

The two 500W Flex Slot power supplies and system fans are the primary field-replaceable units that wear out before the Xeon processors or DDR4 memory.

What thermal or power limit appears first when both 12-core CPUs run at 1.8GHz continuously?

The dual 500W power supplies set the ceiling; sustained full load on all 24 cores can trip their over-current protection before the CPUs throttle.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.