NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
MSI
LGA 1200 Micro ATX board for 10th and 11th Gen Intel Core, Pentium Gold and Celeron CPUs with dual-channel DDR4 up to 128 GB, two M.2 slots, 2.5 Gbps LAN, Wi-Fi, HDMI 2.0b and DisplayPort 1.4
This Micro-ATX board uses the Intel B560 chipset and an LGA 1200 socket to support 10th Gen Intel Core, 11th Gen Intel Core, Pentium Gold and Celeron processors. It targets builders who want a compact platform with modern connectivity for everyday work or gaming. Four DDR4 slots accept up to 128 GB of memory in dual-channel mode.
Two M.2 Key M slots take 2242, 2260 or 2280 drives; the top slot runs at PCIe 4.0 x4 with an 11th Gen CPU and PCIe 3.0 x4 or SATA with a 10th Gen CPU. Six SATA 6 Gb/s ports are available, though SATA2 disables when a SATA drive occupies M2_1. A Realtek RTL8125B controller provides 2.5 Gbps wired networking, while the rear I/O includes HDMI 2.0b, DisplayPort 1.4, a USB 3.2 Gen 2 10 Gbps Type-C port and 7.1-channel audio from the Realtek ALC897 codec.
PCIe 4.0 on the primary x16 slot and the top M.2 slot requires an 11th Gen processor; with a 10th Gen chip both run at PCIe 3.0. Memory defaults are 2133, 2666 or 2933 MHz for 10th Gen and up to 3200 MHz JEDEC for 11th Gen; higher speeds up to 5066+ MHz are possible through XMP overclocking depending on DIMM population. Ensure your case fits a Micro-ATX board and that the power supply provides the required 4-pin CPU and 24-pin ATX connectors.
| Brand | MSI |
|---|---|
| Model | MAG B560M MORTAR WIFI |
| CPU Socket Type | LGA 1200 |
| CPU Type | Supports 10th Gen Intel Core Processors, 11th Gen Intel Core Processors, Pentium Gold and Celeron Processors |
| Chipset | Intel B560 |
| Onboard Video Chipset | 1 x HDMI 2.0b with HDR port, supports a maximum resolution of 4K 60Hz* ** 1 x DisplayPort 1.4 port, supports a maximum resolution of 4K 60Hz* ** *Available only on processors featuring integrated graphics **Graphics specifications may vary depending on the CPU installed. MULTI-GPU: Supports 2-way AMD CrossFire Technology |
| Number of Memory Slots | 4x288pin (DDR4) |
| Memory Standard | Supports 1R 2133/ 2666/ 2933 MHz for 10th Gen Intel CPU (by JEDEC & POR) Supports 1R 2133/ 2666/ 2933/ 3200 MHz for 11th Gen Intel CPU (by JEDEC & POR) Max overclocking frequency: 1DPC 1R Max speed up to 5066+ MHz 1DPC 2R Max speed up to 4600+ MHz 2DPC 1R Max speed up to 4266+ MHz 2DPC 2R Max speed up to 4000+ MHz Supports Dual-Channel mode Supports non-ECC, un-buffered memory Supports Intel Extreme Memory Profile (XMP) |
| Maximum Memory Supported | 128GB |
| Channel Supported | Dual Channel |
| PCI Express x16 | 2 x PCI Express x16 |
| PCI Express x1 | 1 x PCIe 3.0 x1 slot PCI_E2 (From B560 chipset) |
| Other Slots | Support x16/ x4 PCI_E1 (from CPU) Support up to PCIe 4.0 for 11th Gen Intel CPU Support up to PCIe 3.0 for 10th Gen Intel CPU PCI_E3 (From B560 chipset)* Support up to PCIe 3.0 * PCI_E3 will be unavailable when installing M.2 SSD in M2_2 slot. However, if you want to use both of them simultaneously, you can set x1 for PCI_E3 and set x2 for M2_2 in BIOS. |
| Serial ATA (SATA) | 6x SATA 6Gb/s ports (from B560 chipset)* *SATA2 will be unavailable when installing M.2 SATA SSD in the M2_1 slot. |
| M.2 | 2 x M.2 slots (Key M) M2_1 slot Supports up to PCIe 4.0 x4 for 11th Gen Intel CPU (From CPU) Supports up to PCIe 3.0 x4 & SATA 6Gb/s for 10th Gen Intel CPU (From B560 chipset)* Supports 2242/ 2260/ 2280 storage devices M2_2 slot (From B560 chipset) Supports up to PCIe 3.0x4 Supports 2242/ 2260/ 2280 storage devices Intel Optane Memory Ready** Supports Intel Smart Response Technology for Intel Core processors *SATA2 will be unavailable when installing M.2 SATA SSD in the M2_1 slot. **Before using Intel Optane memory modules, please ensure that you have updated the drivers and BIOS to |
| Audio Chipset | Realtek ALC897 Codec Supports S/PDIF output |
| Audio Channels | 7.1 Channels |
| LAN Chipset | 1 x Realtek RTL8125B 2.5Gbps LAN controller |
| Onboard USB | 1 x USB 3.2 Gen 2 10Gbps Type-C port 1 x USB 3.2 Gen 1 5Gbps connector (supports additional 2 USB 3.2 Gen 1 5Gbps ports) 2 x USB 2.0 connectors (supports additional 4 USB 2.0 ports) |
| Other Connectors | 1 x 4-pin CPU fan connector 1 x 4-pin water-pump fan connector 2 x 4-pin system fan connectors 1 x Front panel audio connector 2 x System panel connectors 1 x Chassis Intrusion connector 1 x Clear CMOS jumper 1 x TPM module connector 1 x Tuning Controller Connector 1 x TBT connector (Supports RTD3) |
| Form Factor | Micro ATX |
| Power Pin | 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x 4-pin ATX 12V power connector |
| Features | Supports 10th Gen Intel Core, 11th Gen Intel Core, Pentium Gold and Celeron processors for LGA 1200 socket Supports DDR4 Memory, up to 5066(OC) MHz Lightning M.2: Running at PCIe Gen4 x4 maximizes performance for NVMe based SSDs Premium Thermal Solution: Extended Heatsink Design and M.2 Shield Frozr are built for high performance system and non-stop works 2.5G LAN and Intel Wi-Fi 6E Solution: Upgraded network solution for professional and multimedia use. Delivers a secure, stable and fast network connection Lightning USB 20G: Powered by USB 3.2 Gen2x2 controller, offering never befor |
With an 11th Gen CPU the M2_1 slot runs at PCIe 4.0 x4; with a 10th Gen CPU it drops to PCIe 3.0 x4, limiting sequential throughput to the 3.0 ceiling.
The board follows the Micro‑ATX form factor with standard mounting holes, so it fits any case that lists Micro‑ATX support and provides the matching standoff layout.
The Wi‑Fi card plugs into the CNVi M.2 Key‑E slot near the rear I/O; the screw must be fitted before the antenna cables are snapped on, otherwise the card can lift and lose contact.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?