BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276682BTC
En stock
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM POSIFLEX EK-2450 memory upgrade
16 GB DDR4 3200 SODIMM upgrades POSIFLEX EK-2450 kiosks with CL22 latency
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 MHz boosts POS terminal responsiveness
- CL22 latency and 1.2 V operation keep power draw low
- 2Rx8 dual-rank layout maximises memory density per slot
- 260-pin SODIMM form factor fits POSIFLEX EK-2450 kiosks directly
- Rigorous stress testing validates stability for mission-critical retail workloads
POSIFLEX EK-2450 compatible SODIMM
This 16 GB DDR4 module is built for the POSIFLEX EK-2450 Mercury Series kiosk. It fits systems that accept 260-pin SODIMMs and require non-ECC unbuffered memory. The stick is validated for point-of-sale workloads where stability matters more than raw speed. Buyers needing ECC or registered DIMMs should look elsewhere.
DDR4 3200 CL22 interface limits
The module runs at DDR4 3200 (PC4-25600) with a CAS latency of 22 cycles at 1.20 V. Bandwidth and latency are fixed by the JEDEC standard for this speed grade; no XMP or manual overclock profiles are offered. Systems that demand lower latency or higher frequency than the base specification will not gain from this part.
16 GB single-rank capacity decision
Capacity is 16 GB in a single 2Rx8 SODIMM. If the kiosk motherboard has only one slot, this fills it completely; if it has two, a second identical module can be added later. Buyers who want more than 16 GB per slot or who need a dual-rank kit in one package cannot use this module.
Puntos fuertes
- 16 GB DDR4 3200 MHz boosts POS terminal responsiveness
- CL22 latency and 1.2 V operation keep power draw low
- 2Rx8 dual-rank layout maximises memory density per slot
- 260-pin SODIMM form factor fits POSIFLEX EK-2450 kiosks directly
- Rigorous stress testing validates stability for mission-critical retail workloads
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Preguntas sobre este artículo
Should I pick the single 16 GB module or add a second stick for dual-channel on the POSIFLEX EK-2450?
The kit is a single 16 GB SODIMM; adding a second identical module will enable dual-channel bandwidth on the POSIFLEX EK-2450.
What does the 3200 MT/s rating deliver once the module is installed in the kiosk?
The DDR4 3200 module runs at up to 3200 MT/s (PC4-25600) with CL22 latency at 1.2 V, matching the platform's supported speed.
Will the 260-pin SODIMM fit the POSIFLEX EK-2450 memory slot and what does the interface limit?
Yes, the 260-pin DDR4 SODIMM is the correct form factor for the POSIFLEX EK-2450; the DDR4 interface caps transfer rate at the rated 3200 MT/s.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00279256BTC
En stock
